DM330023-2 Microchip Technology, DM330023-2 Datasheet - Page 24

• Manufacturer Part Number: DM330023-2
• Description: Power Management IC Development Tools dsPICDE MCHV-2
• Manufacturer: Microchip Technology
• Type: Motor / Motion Controllers & Driversr

Specifications of DM330023-2

• Rohs: yes
• Product: Development Boards
• Tool Is For Evaluation Of: PIC24F, PIC24E, dsPIC33F, dsPIC33E
• Input Voltage: 90 V to 265 V
• Output Voltage: 15 V
• Interface Type: UART
• Output Current: 0.75 A
• For Use With: PIC24F, PIC24E, dsPIC33F, dsPIC33E

FIGURE 2-5:
DS52074A-page 24
For the AC mains supply input, standard double-insulated, 3-core flex cable should be
used with a minimum current rating of 10A (1 mm
can be used.
The recommended output cable size is 1.0 to 1.5 mm
a 600V rating. This cable should also be double insulated or have a protective ground
screen. Access to the terminal screws is provided via holes in the lid of the enclosure.
A slotted screwdriver should be used.
Figure 2-7
each connection are provided in the relevant section.
dsPICDEM™ MCHV-2 DEVELOPMENT BOARD CONNECTIONS
The power connections are listed in
Note:
Note:
The system is designed for installation category II. Therefore, the incoming
mains cable should be wired into a standard non-locking 2-pin in addition
with a earth ground type plug.
The user should only access the power terminals when the system is fully
discharged (see
provides the locations of all connectors. Corresponding tables that describe
the“Safety Notice”
Table
2-1.
on page 5).
2
18 AWG). A computer power cable
2
(18-16 AWG) and it should have
 2012 Microchip Technology Inc.