MAX6966EVCMAXQU Maxim Integrated, MAX6966EVCMAXQU Datasheet - Page 3

• Manufacturer Part Number: MAX6966EVCMAXQU
• Description: LED Lighting Development Tools MAXIM EVALUATION SYSTEM
• Manufacturer: Maxim Integrated
• Series: MAX6966, MAX6967r

Specifications of MAX6966EVCMAXQU

• Product: Evaluation Kits

To start the MAX6966 EV kit software, double click the
MAX6966 EV kit icon that is created during installation.
The graphical user interface shown in Figure 1
appears. Wait approximately two seconds while the
MAX6966 EV kit software connects to the CMAXQUSB.
The Select Port group box allows the user to select
one of the 10 MAX6966 ports to configure. Once a port
has been selected, the Port n Configuration group
box allows the port to be configured as a Logic-Level
Input, Logic-Level Output, or a PWM Output.
The Global PWM Settings group box includes controls
to edit the MAX6966’s constant-current LED drivers.
Figure 1. MAX6966 EV Kit Software Screenshot
Detailed Description of Software
MAX6966 Evaluation Kit/Evaluation System
_______________________________________________________________________________________
The Chip Select (CS) Run option is inaccessible
because the CMAXQUSB cannot guarantee timing that
would ensure proper operation of this feature.
Note that the Shutdown feature is only enabled when
the MAX6966’s internal oscillator is enabled. To enable
the internal oscillator, the DOUT/OUT pin must be set
for DOUT and at least one MAX6966 port must be con-
figured for PWM output (at any value except 100% or
0% duty cycle).
The Advanced | Interface menu item allows a low-level
interface to the CMAXQUSB.
3