LZC-WHSK-LIM LedEngin, LZC-WHSK-LIM Datasheet - Page 2

• Manufacturer Part Number: LZC-WHSK-LIM
• Description: LED Lighting Development Tools ViviLux Starter Kit LED and lenses
• Manufacturer: LedEngin

Specifications of LZC-WHSK-LIM

• Product Category: LED Lighting Development Tools
• Rohs: yes
• Product: Starter Kits
• Operating Supply Voltage: 17 VDC

LED Engin
|
651 River Oaks Parkway
9. Using a second wire nut, connect all black wires from LED emitter/board,
10. Connect the high voltage side of the power supply to the Leviton, plug, AC, 2-blade,
11. Select one of the TIR optics and place on top of the LED board in the alignment openings.
12. You are ready to power up your new LED Engin ViviLux™ Starter Kit! NOTE: The
13. Secondary Optics: There are three (3) beam angles offered in the kit for evaluation.
14. Congratulations! Now enjoy your LED Engin ViviLux™ Starter Kit!
Cooliance Coolstrate High Power LED Heatsink Cooler and the low voltage side
(DC Out) the Mean Well, 25 W, Single Output, LED Power Supply together.
polarized, P/N: 101-EP, using the instructions included with the plug. Note the
narrow-blade should be connected to the ACL (BROWN) wire using the GOLD/
BRASS-colored screw.
output of this LED is very bright. Do not look directly into the LED. here will
be a 1-2 second delay from the time the supply is connected to power and the
time the LED lights up. Periodically check that the fan is turning and has not been
blocked or stopped by a foreign object. This product requires forced air for proper cooling.
Each holder can be mounted on top of the connector board. Do not attempt to change
the lens without disconnecting the LED from power. If you choose to permanently
attach a lens holder to the LED assembly, use an epoxy or polyurethane-based
adhesive (for instance: Dow Corning 3145 room temperature vulcanizing
(RTV) silicone). Cyanoacrylate adhesive (commonly sold under trade names
like "Super Glue" and "Krazy Glue") should not be used to avoid contamination
of the lens (blooming of the epoxy). The lens can also be held in place
by mechanical means.
|
San Jose, CA 95134 USA
|
ph [phone]
2
|
fax [phone]
ViviLux Starter Kit Assembly Instructions (1.0-11/01/12)
|
em [e-mail]
|
www.ledengin.com