LFSTBEB865X Freescale Semiconductor, LFSTBEB865X Datasheet - Page 47

• Manufacturer Part Number: LFSTBEB865X
• Description: Acceleration Sensor Development Tools EVB FOR MMA865xQ
• Manufacturer: Freescale Semiconductor

Specifications of LFSTBEB865X

• Rohs: yes
• Tool Is For Evaluation Of: MMA8652FC, MMA8653FC
• Acceleration: 2 g, 4 g, 8 g
• Sensing Axis: Triple Axis
• Interface Type: USB

4.10.4
The Data Configuration and Interrupt Configuration Settings (DataConfig) screen enables you to:
Freescale Semiconductor, Inc.
(Reg 0x2C)
Interrupt Settings
•
•
Screen frame
Set the operation mode for the interrupt pins
Observe the Data Register (0x00) for Data ready status or FIFO status (when the FIFO is enabled)
DataConfig screen
• INT Polarity Active Low
• INT Polarity Active High
• INT Push/Pull
• INT Open Drain
Table 14. Full-System Evaluation – DataConfig screen
Element
MMA865xFC Sensor Toolbox User’s Guide, Rev. 0
• Active Low —the interrupt pins to sit at a logical high level (1), and to go
• Active High —the interrupt pins to sit at a logical low level (0), and to go
• Push/Pull — Activates two transistors on the interrupt pins that push up
• Open Drain— When selected, the interrupt pins will be open drain,
to logical low (0) when they are triggered.
to logical high (1) when they are triggered
or pull down the output to the desired level. This is the default setting.
which allows multiple interrupt signals to be connected to the same
interrupt line.
Description
.
47