TWRPI-BLE-DEMO Freescale Semiconductor, TWRPI-BLE-DEMO Datasheet - Page 4

• Manufacturer Part Number: TWRPI-BLE-DEMO
• Description: Bluetooth / 802.15.1 Development Tools TWRPI-BLE-DEMO
• Manufacturer: Freescale Semiconductor

Specifications of TWRPI-BLE-DEMO

• Rohs: yes
• Product: Bluetooth Tower Plug-In
• Tool Is For Evaluation Of: K40 MCU
• Interface Type: USB

Step-by-Step Installation Instructions
The demo consists of two TWRPI-BLE-
SS1 modules. Both modules are pre-
assembled. One module (collector) is
plugged into the Kinetis KWIKSTIK and
the other module (sender) is plugged into
the RF-BAT board.
Insert the CR2032 coin cell into the
battery slot of the sender on the RF-BAT
board. The device will remain powered
and will be transmitting until the jumper
is removed.
4
1
2
Check the TWRPI-
BLE-SS1 Modules
Insert the
Battery
Quick Start Guide
To power up the collector board, plug the
Kinetis KWIKSTIK board into a PC using
the USB cable provided. Either of the
micro USB ports on the Kinetis KWIKSTIK
will work.
The LCD screen on the KWIKSTIK board
will illuminate after it is powered from
USB cable, and will display a numeric
value which is being transmitted from the
sender representing a heart rate monitor.
3
4
Power the
Board
Confirm Pairing of
the Boards