EVA2035-H Maestro Wireless Solutions, EVA2035-H Datasheet - Page 14

• Manufacturer Part Number: EVA2035-H
• Description: GPS Development Tools SiRF IV GPS Eval kit ant receiver flash
• Manufacturer: Maestro Wireless Solutions

Specifications of EVA2035-H

• Rohs: yes
• Product: Evaluation Kits
• Tool Is For Evaluation Of: A2035-H
• Frequency: 1.575 GHz
• Operating Supply Voltage: 3.3 V to 3.6 V
• Interface Type: I2C, USB
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C

6.3 ICC Jumper
Figure 10: ICC jumper
As long as the VCC DIP switch is “ON” the ICC jumper is bridged. By putting the VCC
DIP switch to the OFF position the current draw of the A2035-H GPS receiver can be
measured directly by connecting a low resistance measurement device to the ICC
jumper.
The low resistance measurement device should be connected before VCC is
switched off!
7 NMEA Port
 Default setting: 4800 baud, 8 data bits, no parity, 1 stop bit, no flow control!
 Standard NMEA-0183 output on NMEA, baud rate selectable.
 Standard USB connectors
8 EVA2035-H Firmware and NMEA Sentences
See separate document GPS Firmware for a detailed description of the standard
firmware loaded onto the modules delivered with the EVA2035-H.
User’s Manual
V0.3– Jun-12
Page 14 of 18