EN23F0QI-E Enpirion, EN23F0QI-E Datasheet - Page 2

• Manufacturer Part Number: EN23F0QI-E
• Description: Power Management IC Development Tools EVAL FOR EN23F0QI
• Manufacturer: Enpirion
• Type: DC/DC Converters, Regulators & Controllersr

Specifications of EN23F0QI-E

• Rohs: yes
• Product: Evaluation Boards
• Tool Is For Evaluation Of: EN23F0QI
• Input Voltage: 4.5 V to 14 V
• Output Voltage: 0.6 V to 5 V
• Output Current: 6 A

Ordering Information
Pin Assignments (Top View)
NOTE A: NC pins are not to be electrically connected to each other or to any external signal, ground, or voltage.
However, they must be soldered to the PCB. Failure to follow this guideline may result in part malfunction or damage.
NOTE B: Shaded area highlights exposed metal below the package that is not to be mechanically or electrically
connected to the PCB. Refer to Figure 14 for details.
NOTE C: White ‘dot’ on top left is pin 1 indicator on top of the device package.
©Enpirion 2012 all rights reserved, E&OE
Part Number
EN23F0QI-E
Packing and Marking
EN23F0QI
Package Markings
EN23F0QI
EN23F0QI
Information:
http://www.enpirion.com/resource-center-packing-and-marking-information.htm
Figure 3: Pin Out Diagram (Top View)
Temp Rating (°C)
-40 to +85
Enpirion Confidential
QFN Evaluation Board
92-pin (12mm x 13mm x 3mm) QFN T&R
Package Description
www.enpirion.com, Page 2
EN23F0QI