PLT1M-C Panduit Corp, PLT1M-C Datasheet - Page 158
![CABLE TIE MINI 18LB 3.9"](/photos/0/88/8835/plt_series_natural_sml.jpg)
PLT1M-C
Manufacturer Part Number
PLT1M-C
Description
CABLE TIE MINI 18LB 3.9"
Manufacturer
Panduit Corp
Series
PAN-TY®r
Type
Pan-Tyr
Datasheets
1.DTHEH-Q0.pdf
(11 pages)
2.PLT1M-M.pdf
(1 pages)
3.PLT1M-C.pdf
(3 pages)
4.PLT1M-C.pdf
(192 pages)
Specifications of PLT1M-C
Tensile Strength
18 lbs. (8.2 kg)
Length
0.325' (99.06mm, 3.90")
Color
Natural
Wire/cable Tie Type
Standard, Locking
Bundle Diameter
0.87" (22.10mm)
Width
0.098" (2.50mm)
Mounting Type
Free Hanging (In-Line)
Maximum Bundle Diameter
0.87 in
Product
Cable Ties
Application
For indoor use
Height
0.154" (Head)
Protection Class
Tie, Cable
Special Features
Locking
Body Material
Nylon 6.6
Operating Temp Range
-40C to 85C
Product Length (mm)
99mm
Product Depth (mm)
4.6mm
Product Height (mm)
3.9mm
Cable Tie Length
3.9"
Cable Tie Width
0.098"
Tensile Strength Pounds
18lb
Cable Bundle Diameter Min
1.5mm
Cable Bundle Diameter Max
0.87"
Accessory Type
Cable Tie
Rohs Compliant
Yes
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Features
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
For Use With
Cable And Wire
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant
Other names
298-1020
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
PLT1M-C76
Manufacturer:
PDT
Quantity:
145
Heat Shrink Installation Instructions
Position heat shrink over the object to be covered. Using a heat gun, soft yellow flame torch, infrared heat
source or oven, evenly heat the tubing until it has fully recovered and conforms to the object. Use caution
not to char or burn the tubing.
TFE tubing is the most difficult to shrink due to its high shrink temperature. TFE shrink tubing must be
heated to the gel state 621°F (327°C) to completely recover. This can be recognized when the tubing
changes from milky white to clear color. It can be shrunk with a heat gun or torch, however, it is very difficult
to use these methods since they have a tendency to overheat the tube in one area while other areas remain
too cool. The most reliable way to shrink TFE is in an oven. Position the heat shrink over the object to be
covered and place it in an oven set at 800°F (427°C) until the tubing turns clear. Once clear, remove
assembly from oven to prevent over heating and allow it to cool at room temperature. Do not quench in cold
air or water. Large objects, particularly metal tubing or rods, must be preheated to get a uniform shrink.
Size Selection for Heat Shrink Tubing
Generally, the largest tube that shrinks down tightly onto an object should be chosen. This allows the heat
shrink tubing maximum stress relief and this will yield the longest service life.
Example:
A multi-conductor cable needs to be covered with HSTT Type D
covered has a measured outside diameter of .700" (17.8mm). The two possibilities are HSTT75-48-5
and HSTT100-48-5.
The proper choice is HSTT100-48-5 since the tube will recover more than HSTT75-48-5. The HSTT75-48-5
will fit over the .700" (17.8mm) outside diameter; however, this is not the proper choice since it is smaller
than the HSTT100-48-5. In general, heat shrink should recover at least 10-20% to reduce stress and yield
158
Most commonly used parts appear in BOLD.
D
RY
-S
HRINK
Part Number
HSTT75-48-5
HSTT100-48-5
™
,
D
AMP
Special Instructions for HSTTT
-S
HRINK
General Instructions
Expanded I.D.
™
.750 (19.0)
1.00 (25.4)
and
in. (mm)
W
ET
-S
HRINK
R Y
Recovered I.D.
-S
.500 (12.7)
.375 (9.5)
HRINK
in. (mm)
™
Heat Shrink Tubing Technical Data
™
Heat Shrink. The area to be