PLT1M-M00 Panduit Corp, PLT1M-M00 Datasheet - Page 66

• Manufacturer Part Number: PLT1M-M00
• Description: CABLE TIE MINI WR BLK 3.9"
• Manufacturer: Panduit Corp
• Series: PAN-TY®r
• Type: Locking Cable Tier

Specifications of PLT1M-M00

• Color: Black
• Wire/cable Tie Type: Standard, Locking
• Bundle Diameter: 0.87" (22.10mm)
• Length: 0.325' (99.06mm, 3.90")
• Width: 0.098" (2.50mm)
• Mounting Type: Free Hanging (In-Line)
• Tensile Strength: 18 lbs. (8.2 kg)
• Features: Weather Resistant
• Body Material: Nylon 6.6
• Operating Temp Range: -40C to 85C
• Product Length (mm): 99mm
• Product Depth (mm): 4.6mm
• Product Height (mm): 3.9mm
• Maximum Bundle Diameter: 0.87 in
• Product: Cable Ties
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Flammability
UL94 Vertical Burning Test
Materials Classed 94V-0
Materials Classed 94V-1
Materials Classed 94V-2
66
A number of test procedures have been developed which can be used for the evaluation
and comparison of various materials to support combustion.
Samples of a material, with dimensions 127mm by 12.7mm and the thickness of the
intended end use product, are tested in an unaged “as manufactured” state and in an
aged state (7 days at 158 °F, 70°C). The test requires the placement of a precisely
Materials classed 94V-0 shall:
• Not have any specimens which burn with flaming combustion for more than 10 seconds after either
• Not have a total flaming combustion time exceeding 50 seconds for the 10 flame applications for each
• Not have any specimens which burn with flaming or glowing combustion up to the holding clamp
• Not have any specimens which drip flaming particles that ignite the dry absorbent surgical cotton
• Not have any specimens with glowing combustion which persists for more than 30 seconds after the
Materials classed 94V-1 shall:
• Not have any specimens which burn with flaming combustion for more than 30 seconds after either
• Not have a total flaming combustion time exceeding 250 seconds for the 10 flame applications for each
• Not have any specimens which burn with flaming or glowing combustion up to the holding clamp
• Not have any specimens which drip flaming particles that ignite the dry absorbent surgical cotton
• Not have any specimens with glowing combustion which persists for more than 60 seconds after the
• Not have any specimens which burn with flaming combustion for more than 30 seconds after either
• Not have a total flaming combustion time exceeding 250 seconds for the 10 flame applications for each
• Not have any specimens which burn with flaming or glowing combustion up to the holding clamp
• Be permitted to have specimens that drip flaming particles which burn only briefly, some of which ignite
• Not have any specimens with glowing combustion which persists for more than 60 seconds after the
controlled flame under a vertically supported specimen for a 10 second period. The
flame is removed and the duration of flaming is recorded. If the flame extinguishes, the
specimen is immediately subjected to a second 10 second ignition period. Duration of
flaming is again recorded. A piece of surgical cotton is placed under the specimen. If
drips ignite the cotton, this fact is also recorded.
application of the test flame
set of five specimens
located 12" (305mm) below the test specimen
second removal of the test flame
application of the test flame
set of five specimens
located 12" (305mm) below the test specimen
second removal of the test flame
application of the test flame
set of five specimens
the dry absorbent surgical cotton placed 12" (305mm) below the test specimen
second removal of the test flame
Most commonly used parts appear in BOLD.
Flammability