AT24C256B-PU Atmel, AT24C256B-PU Datasheet - Page 11

no-image

AT24C256B-PU

Manufacturer Part Number
AT24C256B-PU
Description
IC EEPROM 256KBIT 1MHZ 8DIP
Manufacturer
Atmel
Datasheet

Specifications of AT24C256B-PU

Format - Memory
EEPROMs - Serial
Memory Type
EEPROM
Memory Size
256K (32K x 8)
Speed
400kHz, 1MHz
Interface
I²C, 2-Wire Serial
Voltage - Supply
1.8 V ~ 5.5 V
Operating Temperature
-40°C ~ 85°C
Package / Case
8-DIP (0.300", 7.62mm)
Lead Free Status / RoHS Status
Lead free / RoHS Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
AT24C256B-PU
Manufacturer:
ON
Quantity:
21 000
Part Number:
AT24C256B-PU
Manufacturer:
AT
Quantity:
13
Part Number:
AT24C256B-PU
Manufacturer:
ATMEL/爱特梅尔
Quantity:
20 000
7. Read Operations
5279C–SEEPR–3/09
Read operations are initiated the same way as write operations with the exception that the
read/write select bit in the device address word is set to “1”. There are three read operations:
current address read, random address read, and sequential read.
CURRENT ADDRESS READ: The internal data word address counter maintains the last
address accessed during the last read or write operation, incremented by one. This address
stays valid between operations as long as the chip power is maintained. The address “roll over”
during read is from the last byte of the last memory page, to the first byte of the first page.
Once the device address with the read/write select bit set to “1” is clocked in and acknowledged
by the EEPROM, the current address data word is serially clocked out. The microcontroller does
not respond with an input “0” but does generate a following stop condition (see
Figure 7-1.
RANDOM READ: A random read requires a “dummy” byte write sequence to load in the data
word address. Once the device address word and data word address are clocked in and
acknowledged by the EEPROM, the microcontroller must generate another start condition. The
microcontroller now initiates a current address read by sending a device address with the
read/write select bit high. The EEPROM acknowledges the device address and serially clocks
out the data word. The microcontroller does not respond with a “0” but does generate a following
stop condition (see
Figure 7-2.
Note:
*
= DON’T CARE bit
Current Address Read
Random Read
Figure
7-2).
AT24C256B
Figure
7-1).
11

Related parts for AT24C256B-PU