ISL6292-1CR4 Intersil, ISL6292-1CR4 Datasheet - Page 16
![IC BATT CHRGR LI-ION 4.1V 16-QFN](/photos/6/88/68830/20-16-qfn_sml.jpg)
ISL6292-1CR4
Manufacturer Part Number
ISL6292-1CR4
Description
IC BATT CHRGR LI-ION 4.1V 16-QFN
Manufacturer
Intersil
Datasheet
1.ISL6292-2CR5Z-T.pdf
(20 pages)
Specifications of ISL6292-1CR4
Function
Charge Management
Battery Type
Lithium-Ion (Li-Ion), Lithium-Polymer (Li-Pol)
Voltage - Supply
4.3 V ~ 6.5 V
Operating Temperature
-20°C ~ 70°C
Mounting Type
Surface Mount
Package / Case
16-VQFN Exposed Pad, 16-HVQFN, 16-SQFN, 16-DHVQFN
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
FIGURE 25A. THE EQUIVALENT CIRCUIT IN
If the battery pack voltage reaches 4.2V (or 4.1V) before the
adapter reaches point B in Figure 24, a voltage step is
expected at the adapter output when the pack voltage
reaches the final charge voltage. As a result, the charger
power dissipation is also expected to have a step rise. This
case is shown in Figure 18 as well as Figure 27C. Under this
condition, the worst case thermal dissipation in the charger
happens when the charger enters the constant voltage
mode.
If the adapter voltage reaches the full-load voltage before the
pack voltage reaches 4.2V (or 4.1V), the charger will
experience the resistance-limit situation. In this situation, the
ON-resistance of the charger is in series with the adapter
output resistance. The equivalent circuit for the resistance-limit
region is shown in Figure 25B. Eventually, the battery pack
voltage will reach 4.2V (or 4.1V) because the adapter no-load
voltage is higher than 4.2V (or 4.1V), then Figure 25C becomes
the equivalent circuit until charging ends. In this case, the
worst-case thermal dissipation also occurs in the constant-
current charge mode. Figure 26B shows the I-V curves of the
adapter output, the battery pack voltage and the cell voltage for
the case V
than the final charge voltage (4.2V), but the charger is still able
to fully charge the battery as long as the no-load voltage is
above 4.2V. Figure 26B illustrates the adapter voltage, battery
pack voltage, the charge current and the power dissipation in
the charger respectively in the time domain.
Based on the previous discussion, the worst-case power
dissipation occurs during the constant-current charge mode
if the adapter full-load voltage is lower than the critical
voltage given in Equation 14. Even if that is not true, the
power dissipation is still much less than the power
dissipation in the traditional linear charger. Figures 28 and
29 are scope-captured waveforms to demonstrate the
operation with a current-limited adapter.
The waveforms in Figure 28 are the adapter output voltage
(1V/div), the battery voltage (1V/div), and the charge current
(200mA/div) respectively. The time scale is 1ks/div. The
Adapter
I
LIM
FIGURE 25. THE EQUIVALENT CIRCUIT OF THE CHARGING SYSTEM WORKING WITH CURRENT LIMITED ADAPTERS
FL
THE CONSTANT CURRENT
REGION
= 4V. In the case, the full-load voltage is lower
V
ADAPTER
Charger
R
DS(ON)
V
CELL
I
16
V
Battery
Pack
R
PACK
PACK
FIGURE 25B. THE EQUIVALENT CIRCUIT IN
Adapter
V
NL
r
O
THE RESISTANCE-LIMIT
REGION
V
ADAPTER
ISL6292
Charger
R
DS(ON)
V
CELL
I
adapter current is limited to 600mA and the charge current is
programmed to 1A. Note that the voltage difference is only
approximately 200mV and the adapter voltage tracks the
battery voltage in the CC mode. Figure 28 also shows the
resistance-limit mode before entering the CV mode.
Figure 29 shows the actual captured waveforms depicted in
Figure 27C. The constant charge current is 750mA. A step in
the adapter voltage during the transition from CC mode to
CV mode is demonstrated.
FIGURE 26. THE I-V CHARACTERISTICS OF THE CHARGER
5.9V
4.2V
4.2V
V
V
R
Battery
Pack
NL
PACK
PACK
WITH DIFFERENT CURRENT LIMITED ADAPTERS
FIGURE 25C. THE EQUIVALENT CIRCUIT WHEN
Adapter
V
V
FIGURE 26A.
V
FIGURE 26B.
ADAPTER
0.55A
NL
ADAPTER
r
O
V
THE PACK VOLTAGE REACHES
THE FINAL CHARGE VOLTAGE
CELL
V
V
CELL
V
ADAPTER
PACK
V
4.2V DC
Charger
Output
PACK
V
0.75A
CELL
0.75A
I
December 17, 2007
4.4625V
4.2V
4.05V
3.775V
3.625V
4.2V
4.0V
V
R
Battery
Pack
PACK
PACK
FN9105.9