DS2437S-3/T&R Maxim Integrated Products, DS2437S-3/T&R Datasheet - Page 25
![IC MONITOR SMART BATTERY 16-SSOP](/photos/6/58/65888/175-16-ssop_sml.jpg)
DS2437S-3/T&R
Manufacturer Part Number
DS2437S-3/T&R
Description
IC MONITOR SMART BATTERY 16-SSOP
Manufacturer
Maxim Integrated Products
Datasheet
1.DS2437S-3.pdf
(31 pages)
Specifications of DS2437S-3/T&R
Function
Battery Monitor
Battery Type
Smart Batteries
Voltage - Supply
2.7 V ~ 10 V
Operating Temperature
-40°C ~ 85°C
Mounting Type
Surface Mount
Package / Case
16-SSOP
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
DS2437
Read Time Slots
The host generates read time slots when data is to be read from the DS2437. A read time slot is initiated
when the host pulls the data line from a logic high level to logic low level. The data line must remain at a
low logic level for a minimum of 1 µs; output data from the DS2437 is then valid within the next 14 µs
maximum.
The host therefore must stop driving the I/O pin low in order to read its state 15 µs from the start of the
read slot. (see Figure 10). By the end of the read time slot, the I/O pin will pull back high via the external
pullup resistor. All read time slots must be a minimum of 60 µs in duration with a minimum of a 1 µs
recovery time between individual read slots. Figure 11 shows that the sum of t
, t
, and t
must
INIT
RC
SAMPLE
be less than 15 µs. Figure 12 shows that system timing margin is maximized by keeping t
, and t
as
INIT
RC
small as possible and by locating the master sample time toward the end of the 15 µs period.
RELATED APPLICATIONS NOTES
The following Application Notes can be applied to the DS2437. These notes can be obtained from the
Dallas Semiconductor Application Note Book, via our website at http://www.dalsemi.com, or through our
faxback service at (972) 371-4441.
Application Note 27: “Understanding and Using Cyclic Redundancy Checks with Dallas Semiconductor
Touch Memory Product”
Application Note 74: “Reading and Writing Touch Memories via Serial Interfaces”
Application Note 110: “NiCd/NiMH Intelligent Battery System Reference Design Using the DS2437”
Sample 1-Wire subroutines that can be used in conjunction with AN74 can be downloaded from the
website.
25 of 31