MAX5961ETM+T Maxim Integrated Products, MAX5961ETM+T Datasheet - Page 4

• Manufacturer Part Number: MAX5961ETM+T
• Description: IC CTRLR HOT-SWAP QD 48-TQFN
• Manufacturer: Maxim Integrated Products
• Type: Hot-Swap Controllerr

Specifications of MAX5961ETM+T

• Applications: General Purpose, PCI Express
• Internal Switch(s): No
• Voltage - Supply: 2.7 V ~ 16 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 48-TQFN Exposed Pad
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

V. Quality Assurance Information
VI. Reliability Evaluation
Maxim Integrated Products. All rights reserved.
A. Quality Assurance Contacts:
B. Outgoing Inspection Level:
C. Observed Outgoing Defect Rate:
D. Sampling Plan:
A. Accelerated Life Test
hour life test monitors on its processes. This data is published in the Product Reliability Report found at http://www.maxim-ic.com/.
Current monitor data for the B8 Process results in a FIT Rate of 2.71 @ 25C and 17.30 @ 55C (0.8 eV, 60% UCL)
B. Moisture Resistance Tests
C. E.S.D. and Latch-Up Testing
JEDEC JESD22-A114-D. Latch-Up testing has shown that this device withstands a current pulse of +/-100mA and an
over voltage of 1.5xVcc Max.
=
MTTF
The results of the 135°C biased (static) life test are pending. Using these results, the Failure Rate ( ) is calculated as follows:
The following failure rate represents data collected from Maxim’s reliability monitor program. Maxim performs quarterly 1000
The industry standard 85°C/85%RH or HAST testing is monitored per device process once a quarter.
The NQ09 die type has been found to have all pins able to withstand a HBM transient pulse of +/-2500V per
1
= 22.91 x 10
= 22.91 F.I.T. (60% confidence level @ 25°C)
=
-9
(where 4340 = Temperature Acceleration factor assuming an activation energy of 0.8eV)
192 x 4340 x 48 x 2
1.83
(Chi square value for MTTF upper limit)
Ken Wendel (Director, Reliability Engineering)
Bryan Preeshl (Managing Director of QA)
0.1% for all electrical parameters guaranteed by the Datasheet.
0.1% For all Visual Defects.
< 50 ppm
Mil-Std-105D
MAX5961ETM+
Page 4/5