MAX3766EEP+ Maxim Integrated Products, MAX3766EEP+ Datasheet - Page 6

• Manufacturer Part Number: MAX3766EEP+
• Description: IC LASR DRVR 622MBPS 5.5V 20QSOP
• Manufacturer: Maxim Integrated Products
• Type: Laser Diode Driver (Fiber Optic)r

Specifications of MAX3766EEP+

• Data Rate: 622Mbps
• Number Of Channels: 1
• Voltage - Supply: 4.5 V ~ 5.5 V
• Current - Supply: 25mA
• Current - Modulation: 60mA
• Current - Bias: 80mA
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-QSOP
• Mounting Type: Surface Mount
• Operating Supply Voltage: 5 V
• Supply Current: 25 mA
• Maximum Operating Temperature: + 85 C
• Maximum Power Dissipation: 590 mW
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

622Mbps LAN/WAN Laser Driver with
Automatic Power Control and Safety Shutdown
6
PIN
5, 8
10
11
12
13
14
15
16
17
18
19
20
_______________________________________________________________________________________
1
2
3
4
6
7
9
POWERSET
BIASMAX
GNDOUT
ENABLE
SAFETY
V
NAME
OUT+
REF2
CCOUT
OUT-
REF1
MOD
GND
BIAS
FAIL
V
IN+
MD
TC
IN-
CC
The current into BIASMAX sets the maximum laser bias current. Connecting BIASMAX directly to REF1
allows the largest possible bias current.
The resistance (R
TC directly to REF1 produces the minimum tempco. Leaving TC unconnected produces the maximum
tempco.
REF2 is the reference voltage used to program the modulation current. The tempco of REF2 is pro-
grammed by R
The current into MOD programs the laser modulation current. Connect MOD to REF2 with a resistor or
potentiometer.
Ground. All grounds must be connected.
Inverting Data Input
Noninverting Data Input
Positive Supply Voltage. All V
ENABLE is a TTL-compatible input. When low or open, this pin disables the output modulation and bias
current.
A capacitor to ground at SAFETY determines the turn-on delay for the safety circuits. If SAFETY is
grounded or TTL low, internal safety shutdown features are disabled. A TTL high at SAFETY enables the
internal safety shutdown features.
The FAIL output asserts low if the voltage at MD is above or below nominal. FAIL also asserts if REF1 is
inadvertently tied to the positive supply. FAIL has TTL-compatible output voltage levels.
Supply Voltage for the Output Current Drivers
Inverting Modulation-Current Output
Noninverting Modulation-Current Output
Connection for the DC Laser Bias Current
Ground for the Output Current Drivers
Input for the laser monitor photodiode current.
The current into POWERSET programs the average optical output power when automatic power
control is used.
REF1 is a voltage reference used to program laser bias current and average power.
TC
.
TC
) between TC and REF1 programs the temperature coefficient of REF2. Connecting
CC
pins must be connected.
FUNCTION
Pin Description