CBC3150-D9C-TR5 Cymbet Corporation, CBC3150-D9C-TR5 Datasheet
![IC BATT SOLID ST ENERCHIP 20DFN](/photos/17/91/179119/cbc3150_sml.jpg)
CBC3150-D9C-TR5
Specifications of CBC3150-D9C-TR5
Related parts for CBC3150-D9C-TR5
CBC3150-D9C-TR5 Summary of contents
Page 1
... EnerChip™ CC Inductive Charging Evaluation Kit Overview CBC-EVAL- demonstration kit combining an inductive transmitter board with a receiver board containing an EnerChip CC CBC3150 solid state storage device with integrated power management. The transmitter board operates at 13.56 MHz and derives its power from a USB port. In addition to ...
Page 2
... EnerChip rechargeable cell. When the CBC-EVAL-11 receiver antenna is placed near a magnetic field at a frequency of 13.56MHz, and if the voltage at the CBC3150 VDD pin is greater than 3.0V, the CBC3150 will route the harvested power directly to the energy harvesting connectors. In this mode of operation the CBC3150’ ...
Page 3
... EnerChip™ CC Inductive Charging Evaluation Kit Receiver Board Texas Intruments Radio/MCU Board (not included Figure 4: Schematic of CBC-EVAL-11 transmitter board. ©2010 Cymbet Corporation • Tel: +1-763-633-1780 • www.cymbet.com DS-72-14 Rev A Figure 3: CBC-EVAL-11 Evaluation Kit. USB Power Cable and Connector Transmitter Board Page ...
Page 4
... See the section titled Circuit Board Alterations for proper techniques to separate the planar antenna from the receiver board. Figure 6: Schematic of CBC-EVAL-11 receiver board. ©2010 Cymbet Corporation • Tel: +1-763-633-1780 • www.cymbet.com DS-72-14 Rev A Page ...
Page 5
... Recharge Time (to 80% of rated capacity) Capacity (1) First month recoverable self discharge is 5% average. (2) Storage temperature is for uncharged EnerChip CC device. Note: All specifications contained within this document are subject to change without notice Typical Discharge Capacity Characteristics ©2010 Cymbet Corporation • Tel: +1-763-633-1780 • www.cymbet.com DS-72-14 Rev A Condition Min 25°C GND - 0.3 25°C GND - 0.3 25° ...
Page 6
... Once the capacitance has been determined, the capacitor charging time can be calculated using the following formula: Charge formula (Vmax - Vchg) / (Vmin - Vchg) ] where capacitor charging time, from Vmin to Vmax R = EnerChip storage device resistance C = output capacitance, in parallel with the EnerChip storage device ©2010 Cymbet Corporation • Tel: +1-763-633-1780 • www.cymbet.com DS-72-14 Rev A Page ...
Page 7
... CBC3150 EnerChip in the surface mount DFN package. To minimize stress on the solder joints recommended that the board be cut cleanly through rather than scoring and breaking the board apart ...
Page 8
... EnerChip CC Part Number CBC-EVAL-11 CBC3150-D9C CBC3150-D9C-TR1 CBC3150-D9C-TR5 CBC3150-D9C-WP Disclaimer of Warranties The information provided in this data sheet is provided “As Is” and Cymbet Corporation disclaims all representations or warranties of any kind, express or implied, relating to this data sheet and the Cymbet product described herein, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, non-infringement, title, or any warranties arising out of course of dealing, course of performance, or usage of trade ...