IR3504MTRPBF International Rectifier, IR3504MTRPBF Datasheet - Page 38

• Manufacturer Part Number: IR3504MTRPBF
• Description: IC CTRL XPHASE3 SVID 32-MLPQ
• Manufacturer: International Rectifier
• Series: XPhase3™r

Specifications of IR3504MTRPBF

• Applications: Processor
• Current - Supply: 10mA
• Voltage - Supply: 4.75 V ~ 7.5 V
• Operating Temperature: 0°C ~ 100°C
• Mounting Type: Surface Mount
• Package / Case: *
• Package: 32-Lead MLPQ
• Circuit: X-Phase Control IC
• Switch Freq (khz): 250kHz to 1.5MHz
• Pbf: PbF Option Available
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

LAYOUT GUIDELINES
The following layout guidelines are recommended to reduce the parasitic inductance and resistance of the PCB
layout, therefore minimizing the noise coupled to the IC.
•
•
•
•
•
•
•
•
•
Dedicate at least one middle layer for a ground plane LGND.
Connect the ground tab under the control IC to LGND plane through a via.
Separate analog bus (EAIN, DACIN and ISHARE) from digital bus (CLKIN, PHSIN, and PHSOUT) to reduce
the noise coupling.
Place VCCL decoupling capacitor VCCL as close as possible to VCCL and LGND pins.
Place the following critical components on the same layer as control IC and position them as close as
possible to the respective pins, ROSC, ROCSET, RVDAC, CVDAC, and CSS/DEL. Avoid using any via for
the connection.
Place the compensation components on the same layer as control IC and position them as close as possible
to EAOUT, FB, VO and VDRP pins. Avoid using any via for the connection.
Use Kelvin connections for the remote voltage sense signals, VOSNS+ and VOSNS-, and avoid crossing over
the fast transition nodes, i.e. switching nodes, gate drive signals and bootstrap nodes.
Avoid analog control bus signals, VDAC, IIN, and especially EAOUT, crossing over the fast transition nodes.
Separate digital bus, CLKOUT, PHSOUT and PHSIN from the analog control bus and other compensation
components.
Page 38
July 28, 2009
IR3504