LTC1968CMS8#TRPBF Linear Technology, LTC1968CMS8#TRPBF Datasheet - Page 25
![IC CONVERTER RMS-DC PREC 8MSOP](/photos/6/57/65743/8-msop_05-08-1660_sml.jpg)
LTC1968CMS8#TRPBF
Manufacturer Part Number
LTC1968CMS8#TRPBF
Description
IC CONVERTER RMS-DC PREC 8MSOP
Manufacturer
Linear Technology
Datasheet
1.LTC1968CMS8PBF.pdf
(28 pages)
Specifications of LTC1968CMS8#TRPBF
Current - Supply
2.3mA
Voltage - Supply
5.0V
Mounting Type
Surface Mount
Package / Case
8-MSOP, Micro8™, 8-uMAX, 8-uSOP,
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
APPLICATIO S I FOR ATIO
7. Output is noisy with >200kHz inputs.
8. Large errors occur at crest factors approaching, but
9. Screwy results, errors > spec limits, typically 1% to 5%.
– This is a fundamental characteristic of this topol-
less than 4.
– Insufficient averaging.
– High impedance (12.5kΩ) and high accuracy (0.1%)
ogy. The LTC1968 is designed to work very well
with inputs of 100kHz or less. It works okay as high
as 1MHz, but it is limited by aliased ∆Σ noise.
Solution: Bandwidth limit the input or digitally filter
the resulting output.
Solution: Increase C
DC Waveforms” section for discussion of output
droop.
require clean boards! Flux residue, finger grime, etc.
all wreak havoc at this level.
Solution: Wash the board.
U
KEEP BOARD CLEAN
LTC1968
AVE
U
. See “Crest Factor and AC +
W
1968 TS09
U
10. Gain is low by ≅1% or more, no other problems.
– Probably due to circuit loading. With a DMM or a
– Loading can also be caused by cheap averaging
10× scope probe, Z
output is 12.5kΩ, resulting in – 0.125% gain
error. Output impedance is higher with the DC
accurate post filter.
Solution: Remove the shunt loading or buffer the
output.
capacitors.
Solution: Use a high quality metal film capacitor
for C
AVE
V
OUT
.
OUT RTN
LTC1968
LOADING DRAGS DOWN GAIN
12.5k
5
6
IN
200mV
= 10MΩ. The LTC1968
–0.125%
10M
RMS
DMM
IN
1968 TS10
DCV
mV
LTC1968
25
1968f