MCP9804-E/MS Microchip Technology, MCP9804-E/MS Datasheet - Page 14

• Manufacturer Part Number: MCP9804-E/MS
• Description: IC TEMP SENSOR I2C 2.7V 8MSOP
• Manufacturer: Microchip Technology

Specifications of MCP9804-E/MS

• Package / Case: 8-MSOP, Micro8™, 8-uMAX, 8-uSOP,
• Function: Temp Monitoring System (Sensor)
• Topology: ADC (Sigma Delta), Register Bank
• Sensor Type: Internal
• Sensing Temperature: -40°C ~ 125°C
• Output Type: I²C™/SMBus™
• Output Alarm: No
• Output Fan: No
• Voltage - Supply: 2.7 V ~ 5.5 V
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Temperature Threshold: + 150 C
• Full Temp Accuracy: +/- 0.25 %
• Digital Output - Bus Interface: 2-Wire, I2C
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 2.7 V
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 40 C
• Supply Current: 200 uA
• Ic Output Type: Digital
• Sensing Accuracy Range: ± 0.25°C
• Temperature Sensing Range: -40°C To +125°C
• Supply Voltage Range: 2.7V To 5.5V
• Sensor Case Style: MSOP
• No. Of Pins: 8
• Rohs Compliant: Yes
• Supply Voltage Min: 2.7V
• Leaded Process Compatible: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

MCP9804
4.1.5
After the Start condition, each bit of data in
transmission needs to be settled for a time specified by
t
Sensor Serial Interface Timing Specifications section).
4.1.6
Each receiving device, when addressed, is obliged to
generate an ACK bit after the reception of each byte.
The master device must generate an extra clock pulse
for ACK to be recognized.
The acknowledging device pulls down the SDA line for
t
the master. SDA also needs to remain pulled down for
t
During read, the master must signal an End-of-Data
(EOD) to the slave by not generating an ACK bit (NAK)
once the last bit has been clocked out of the slave. In
this case, the slave will leave the data line released to
enable the master to generate the Stop condition.
DS22203B-page 14
SU-DATA
SU-DATA
H-DATA
after a high-to-low transition of SCL.
before SCL toggles from low-to-high (see the
before the low-to-high transition of SCL from
DATA VALID
ACKNOWLEDGE (ACK/NAK)
4.1.7
If the SCL stays low or high for the time specified by
t
serial interface. This dictates the minimum clock speed
as specified in the specification.
OUT
, the MCP9804 temperature sensor resets the
TIME OUT
© 2009 Microchip Technology Inc.