W83792G Nuvoton Technology Corporation of America, W83792G Datasheet - Page 7

• Manufacturer Part Number: W83792G
• Description: IC MONITOR H/W 48-LQFP
• Manufacturer: Nuvoton Technology Corporation of America

Specifications of W83792G

• Function: Hardware Monitor
• Topology: ADC, Fan Control, Register Bank
• Sensor Type: External
• Sensing Temperature: External Sensor
• Output Type: I²C™
• Output Alarm: Yes
• Output Fan: Yes
• Voltage - Supply: 4.5 V ~ 5.5 V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 48-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

W83792AD/AG/D/G
1. GENERAL DESCRIPTION
W83792AD/AG and W8392D/G are two parts support single and dual CPU application, the former is
for single CPU application which provides 1 set thermal trip and 1 set of VID controlling; the latter is for
dual CPU application which provides dual CPU VID controlling and 2 sets of thermal trip. Other
functions are all the same without difference except thermal trip and VID controlling numbers.
W83792D/G is an evolving version of the W83791D --- Winbond's most popular hardware status
monitoring IC. Besides the conventional functions of W83791D, W83792D/G uniquely provides
several innovative features such as support dual CPU VID controlling, VRM9.0 and VRD10.0
specifications supported, ASF 2.0 specification compliant, SMBus 2.0 ARP command compatible, 2
TM
sets of Thermal trip, 12 VID control, 6 sets of Smart fan
, VID table selection trapping.
Conventionally, W83792D/G can be used to monitor several critical hardware parameters of the
system, including power supply voltages, fan speeds, and temperatures, which are very important for
a high-end computer system, such as server, workstation…etc, working very stably and efficiently.
A 10-bit analog-to-digital converter (ADC) was built inside W83792D/G. W83792D/G can
simultaneously monitor 9 analog voltage inputs (including power VDD/5VSB monitoring), 6 fan
tachometer inputs, 3 remote temperatures, and Watch Dog Timer function. The sense of remote
TM
temperature can be performed by thermistors, or directly from Intel
CPU with thermal diode output.
W83792D/G provides 6 PWM (pulse width modulation)/DC fan output modes for smart fan control -
TM
TM
TM
Thermal Cruise
mode and
Smart Fan
II
mode. Under
Thermal Cruise
mode,
temperatures of CPU and the system can be maintained within specific programmable ranges under
TM
the hardware control. As Smart Fan
II, which provides 4 sets of temperatures point each could
control fan’s duty cycle, depends on this construction, fan could be operated at the lowest possible
speed so that the acoustic noise could be avoided. As for warning mechanism, W83792D/G provides
SMI#, OVT#, IRQ signals for system protection events.
TM
Additionally, 12 VID inputs are provided to read 2 sets of VID for CPU (i.e. Pentium
III/4). These VID
inputs provide the information of Vcore voltage that CPU expects. W83792D/G also has 2 specific pins
to provide selectable address setting for application of multiple devices (up to 4 devices) wired through
2
I
C interface.
W83792D/G can uniquely serve as an ASF sensor to respond to ASF master’s request for the
implementation of network management in OS-absent status. Through W83792D/G’s compliance with
ASF2.0 sensor specification, network server is able to monitor the environmental status of each client
in OS-absent state by PET (Platform Event Trip) frame values returned from W83792D/G, such as
temperatures, voltages, fan speed, thermal trip, and case open. Moreover, W83792D/G supports
SMBus 2.0 ARP command to solve the problem of address conflicts by dynamically assigning a new
unique address for W83792D/G ASF Function after W83792D/G’s UDID is sent.
Through the application software or BIOS, the users can read all the monitored parameters of the
system from time to time. A pop-up warning can also be activated when the monitored item is out of
the proper/preset range. The application software could be Winbond's Hardware Doctor
, Intel
TM
TM
LDCM (LanDesk Client Management), or other management application software. Besides, the users
can set up the upper and lower limits (alarm thresholds) of these monitored parameters and activate
one programmable and maskable interrupts.
Publication Release Date: April 26, 2006
- 1 -
Revision 0.9