CKCM25X7R1E103M TDK Corporation, CKCM25X7R1E103M Datasheet - Page 12

• Manufacturer Part Number: CKCM25X7R1E103M
• Description: CAP 2-ARRAY 10000PF 25V X7R 0504
• Manufacturer: TDK Corporation
• Series: CKCr

Specifications of CKCM25X7R1E103M

• Capacitance: 10000pF
• Voltage - Rated: 25V
• Dielectric Material: Ceramic
• Number Of Capacitors: 2
• Circuit Type: Isolated
• Temperature Coefficient: X7R
• Tolerance: ±20%
• Mounting Type: Surface Mount
• Package / Case: 0504 (1210 Metric)
• Height: 0.035" (0.90mm)
• Size / Dimension: 0.054" L x 0.039" W (1.37mm x 1.00mm)
• Capacitance Tolerance: ± 20%
• No. Of Elements: 2
• Voltage Rating: 25V
• Operating Temperature Range: -55°C To +125°C
• Capacitor Mounting: SMD
• Rohs Compliant: Yes
• Dielectric Characteristic: X7R
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

• All specifications are subject to change without notice. Please read the precautions before using the product.
US Catalog // CKC Series — Array Type Capacitors // Version A11
No.
9
10
11
General
Specifications
Item
Robustness of
Terminations
Solderability
Vibration
External
appearance
Capacitance
Q (Class 1)
D.F. (Class 2)
Performance
No sign of termination coming off,
breakage of ceramic, or other abnormal
signs.
New solder to cover over 75% of
termination. 25% may have pin holes
or rough spots but not concentrated in
one spot. Ceramic surface of “A
sections” shall not be exposed due to
melting or shifting of termination
material.
No mechanical damage.
Meet the initial spec.
Characteristics
Class 1
Class 2
Rated
Capacitance
30pF and over
Under 30pF
C0G
X5R
X7R
C : Rated capacitance (pF)
CKC Series — Array Type Capacitors
Change from the
value before test
±2.5%
± 7.5 %
Q
1,000 min.
400+20×C min.
A section
Test or Inspection Method
Reflow solder the capacitors on P.C. board (shown in
Appendix 1 to 3) and apply a pushing force of 5N with
10±1s.
Completely soak both terminations in
solder at 235±5ºC for 2±0.5s.
Solder : H63A (JIS Z 3282)
Flux : Isopropyl alcohol (JIS K 8839)
Reflow solder the capacitors on P.C. board (shown in
Appendix 1 to 3) before testing.
Vibrate the capacitor with amplitude of 1.5mm P-P
sweeping the frequencies from 10Hz to 55Hz and back
to 10Hz in about 1min.
Repeat this for 2h each in 3 perpendicular directions.
Rosin (JIS K 5902) 25% solid solution.
Capacitor
P.C. Board
5N