HCPL-0300#500 Avago Technologies US Inc., HCPL-0300#500 Datasheet - Page 5

• Manufacturer Part Number: HCPL-0300#500
• Description: OPTOCOUPLER 1CH 8MBD 8-SOIC
• Manufacturer: Avago Technologies US Inc.

Specifications of HCPL-0300#500

• Package / Case: 8-SOIC (0.154", 3.90mm Width)
• Voltage - Isolation: 3750Vrms
• Number Of Channels: 1, Unidirectional
• Current - Output / Channel: 25mA
• Data Rate: 8MBd
• Propagation Delay High - Low @ If: 110ns @ 625µA
• Current - Dc Forward (if): 5mA
• Input Type: DC
• Output Type: Open Collector
• Mounting Type: Surface Mount
• Isolation Voltage: 3750 Vrms
• Maximum Continuous Output Current: 25 mA
• Maximum Fall Time: 20 ns
• Maximum Forward Diode Current: 5 mA
• Maximum Rise Time: 40 ns
• Minimum Forward Diode Voltage: 1 V
• Output Device: Logic Gate Photo IC
• Configuration: 1 Channel
• Maximum Baud Rate: 8 MBps
• Maximum Forward Diode Voltage: 1.5 V
• Maximum Reverse Diode Voltage: 3 V
• Maximum Power Dissipation: 40 mW
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Solder Reflow Temperature Profile
Note: Non-halide flux should be used.
Note: Non-halide flux should be used.
Insulation and Safety Related Specifications
Option 300 – surface mount classification is Class A in accordance with CECC 00802.
Recommended Pb-Free IR Profile
5
Parameter
Min. External Air Gap
(External Clearance)
Min. External Tracking Path
(External Creepage)
Min. Internal Plastic Gap
(Internal Clearance)
Tracking Resistance
(Comparative Tracking Index)
Isolation Group
Symbol
L(IO1)
L(IO2)
CTI
Value
7.1
7.4
0.08
200
IIIa
Units
mm
mm
mm
Volts
Regulatory Information
The HCPL-2300 has been approved by the following or-
ganizations:
UL
Recognized under UL 1577, Component Recognition
Program, File E55361.
CSA
Approved under CSA Component Acceptance Notice #5,
File CA 88324.
IEC/EN/DIN EN 60747-5-2
Approved under:
IEC 60747-5-2:1997 + A1:2002
EN 60747-5-2:2001 + A1:2002
DIN EN 60747-5-2 (VDE 0884
Teil 2):2003-01
(Option 060 only)
Conditions
Measured from input terminals to output
terminals, shortest distance through air
Measured from input terminals to output
terminals, shortest distance path along body
Through insulation distance, conductor to
conductor, usually the direct distance
between the photoemitter and photodetector
inside the optocoupler cavity
DIN IEC 112/VDE 0303 PART 1
Material Group (DIN VDE 0110, 1/89, Table 1)