PS8741-A CEL, PS8741-A Datasheet - Page 7

• Manufacturer Part Number: PS8741-A
• Description: PHOTOCOUPLER OPTICAL DAA 16-S
• Manufacturer: CEL
• Series: NEPOCr

Specifications of PS8741-A

• Number Of Channels: 2
• Input Type: DC
• Voltage - Isolation: 1500Vrms
• Current Transfer Ratio (min): 0.75% @ 2mA
• Current Transfer Ratio (max): 1.25% @ 2mA
• Current - Dc Forward (if): 50mA
• Output Type: Photovoltaic
• Mounting Type: Surface Mount
• Package / Case: 16-SOP
• Current Transfer Ratio: 0.3 % to 1.8 %
• Forward Current: 5 mA
• Isolation Voltage: 1500 Vrms
• Output Device: Photodiode
• Configuration: 2 Channel
• Maximum Forward Diode Voltage: 1.4 V
• Maximum Reverse Diode Voltage: 3 V
• Maximum Input Diode Current: 0.5 A
• Maximum Power Dissipation: 180 mW
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Voltage - Output: -
• Current - Output / Channel: -
• Vce Saturation (max): -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
(2) Wave soldering
(3) Cautions
• Peak reflow temperature
• Time of peak reflow temperature
• Time of temperature higher than 220°C
• Time to preheat temperature from 120 to 180°C
• Number of reflows
• Flux
• Temperature
• Time
• Preheating conditions
• Number of times
• Flux
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
260°C or below (molten solder temperature)
10 seconds or less
120°C or below (package surface temperature)
One (Allowed to be dipped in solder including plastic mold portion.)
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
120˚C
(preheating)
120±30 s
Data Sheet PN10134EJ03V0DS
180˚C
260°C or below (package surface temperature)
10 seconds or less
60 seconds or less
120±30 s
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Time (s)
(heating)
to 60 s
to 10 s
260˚C MAX.
220˚C
PS8741
7