VO4157H Vishay, VO4157H Datasheet - Page 7

• Manufacturer Part Number: VO4157H
• Description: PHOTOTRIAC ZC 700V 1.6MA 6DIP
• Manufacturer: Vishay

Specifications of VO4157H

• Isolation Voltage: 5300 Vrms
• Voltage - Isolation: 5300Vrms
• Number Of Channels: 1
• Voltage - Off State: 700V
• Output Type: AC, Triac, Zero Cross
• Current - Gate Trigger (igt) (max): 2mA
• Current - Hold (ih): 500µA
• Current - Dc Forward (if): 60mA
• Current - Output / Channel: 300mA
• Mounting Type: Through Hole
• Package / Case: 6-DIP (0.300", 7.62mm)
• Configuration: 1
• Maximum Continuous Output Current: 300 mA
• Maximum Input Current: 60 mA
• Maximum Operating Temperature: + 100 C
• Maximum Power Dissipation: 600 mW
• Maximum Reverse Diode Voltage: 6 V
• Minimum Operating Temperature: - 55 C
• Typical Input Voltage: 1.2 V
• Zero-crossing Circuit: Yes
• Zero-crossing Voltage: 20 V
• Output Device: Triac
• Peak Output Voltage (vdrm): 700 V
• Maximum Input Voltage: 1.4 V
• Maximum Output Voltage: 490 VAC
• Minimum Trigger Current: 2 mA (Max)
• No. Of Channels: 1
• Optocoupler Output Type: Phototriac
• Input Current: 10mA
• Output Voltage: 700V
• Opto Case Style: DIP
• No. Of Pins: 6
• Input Current Max: 10mA
• Forward Voltage: 1.2V
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

OZONE DEPLETING SUBSTANCES POLICY STATEMENT
It is the policy of Vishay Semiconductor GmbH to
1. Meet all present and future national and international statutory requirements.
2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with
It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone
depleting substances (ODSs).
The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use
within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances.
Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in
the following documents.
1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively.
2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency
3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively.
Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do
not contain such substances.
customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall
Document Number: 84634
Rev. 1.5, 03-Nov-08
Parameters can vary in different applications. All operating parameters must be validated for each customer application by the
indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any
respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment.
(EPA) in the USA
claim of personal damage, injury or death associated with such unintended or unauthorized use.
Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany
We reserve the right to make changes to improve technical design
For technical questions, please contact: [e-mail]
Optocoupler, Phototriac Output,
Zero Crossing, High dV/dt, Low
and may do so without further notice.
Input Current
Vishay Semiconductors
VO4157, VO4158
www.vishay.com
953