1534858-1 Tyco Electronics, 1534858-1 Datasheet - Page 29
1534858-1
Manufacturer Part Number
1534858-1
Description
STORAGE BOX SOLARLOK-BAG ASSY
Manufacturer
Tyco Electronics
Series
Solarlok®r
Specifications of 1534858-1
Kit Contents
(1) 4-1579002-2-ND - SOLARLOK STRIPP-HT(1) A98837-ND - TOOL EXTRACTION SOLARLOK(1) A98836-ND - TOOL CRIMP 10-12AWG SOLARLOK(50) A98823-ND - CONN MALE MINUS COUPLER 12AWG(50) A98828-ND - CONN FEMALE MINUS COUPLER 12AWG(50) A98822-ND - CONN MALE PLUS COUPLER 12AWG(50) A98827-ND - CONN FEMALE PLUS COUPLER 12AWG
Kit Type
Photovoltaic (Solar Panel)
Values
58 pcs - Assorted Couplers, Crimp Tool, Extraction Tool
Product
Field Service Kits
Description/function
100 cable coupler - housings, plus/minus coded, crimp contacts, strain relief, seals, hand crimp and extraction tool, insulation stripper
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant
3.4 DC/AC Converter Receptacle
SOLARLOK Interconnection System
Assembly and Installation Guidelines
1 Place a single wire seal onto the wire and strip wire
2 Crimp the contact using the correct applicator for the wire gauge (# 114-74013)
3 Place O-ring onto the connector housing; push in wire to stop until contact locks into the housing
4 Push seal into the housing
5 Assembly of the cover cap (not available with every version) and mounting in front panel
■
■
■
All specifications subject to change. Consult Tyco Electronics for latest specifications.
(single wire seals are not available with every version).
Required panel mount hole diameter: Diameter 12.5 mm.
The panel thickness must not be under 1.0 mm.
For environmental protection of the unmated connector, use of the covering cap is recommended.
Cover:
Part No. 1394739-1
(continued)
Catalog 889753-3
Revised 6-2008
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 9
27