APSX1250 Tripp Lite, APSX1250 Datasheet - Page 3

• Manufacturer Part Number: APSX1250
• Description: INVERTER 1250W 12VDC OR 230VAC
• Manufacturer: Tripp Lite
• Series: PowerVerter® APSXr
• Type: Inverter, UPSr

Specifications of APSX1250

• Voltage - Output: 230VAC
• Voltage - Input: 12VDC, 230VAC
• Ac Outlets: 2
• Connector - Ac Output: IEC 320-C13
• Connector - Voltage Input: Terminals, AC Inlet (IEC-320 C14)
• Power - Output Continuous: 1250W
• Power - Output Surge: 2500W
• Remote Capability: Yes
• Region Utilized: Internationally
• Size: 9.00" L x 8.75" W x 7.00" H (228.6mm x 222.3mm x 177.8mm)
• Features: Auto Power Transfer for UPS Mode, Battery Charger
• Weight: 24 lbs (10.9kg)
• Ac Output Connector: IEC 320-C13
• Voltage - Input Connector: Terminals, IEC-320 C14
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Recommended
Electrical Service
Maximum input
amps / watts
Input connection
type
Voltage
compatibility (VAC)
Voltage
compatibility (VDC)
BATTERY
Expandable
battery runtime
DC system voltage
(VDC)
Battery Pack
Accessory
(optional)
Battery recharge
rate
LEDS ALARMS & SWITCHES
Switches
Front panel LEDs
SURGE / NOISE SUPPRESSION
AC suppression
joule rating
PHYSICAL
Shipping weight
(lbs)
Shipping weight
(kg)
Cooling method
Unit Dimensions
(HWD/in)
Unit Dimensions
(HWD/cm)
Shipping
Dimensions
(HWD/in)
Shipping
Dimensions
(HWD/cm)
Unit weight (lbs)
DC INPUT: Requires 12VDC input source capable of delivering 125A for the required duration (when used at full
continuous capacity - DC requirements increase during OverPower and DoubleBoost operation). For automotive
applications, professional hardwire installation with 225A minimum battery system fusing is recommended. AC INPUT:
230VAC
DC INPUT: Full continuous load - 125A at 12VDC. AC INPUT: 9.3A at 230VAC with full inverter and charger load (3.3A
max charger-only / combined input load to support charger and AC output is automatically controllable to 66%-33%-0%
based on AC output loading using the charger limiting set points - see manual for setting instructions)
DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: IEC-320 C14 inlet connection
230
12
Runtime is expandable with any number of user supplied wet or gel type batteries
12
98-121
Selectable 7.5 / 30 amp with 1/2 cycle transfer time
3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant on/off
control of the inverter system when used in conjunction with optional
In AC uninterruptible power mode, auto/remote setting enables automatic transfer from line power to battery power - to
maintain continuous AC power to connected loads.
Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7
levels reported). See manual for sequences.
840
26
11.8
Multi-speed fan
7 x 8.75 x 9
17.78 x 22.23 x 22.86
12.5 x 11 x 10.75
31.75 x 27.94 x 27.31
24
sealed lead acid battery (optional)
APSRM4
accessory when used in inverter mode.