NHD-0216K1Z-NS(RGB)-FBW-REV1 Newhaven Display, NHD-0216K1Z-NS(RGB)-FBW-REV1 Datasheet - Page 7
![LCD MOD CHAR 16X2 RGB TRANSM](/photos/7/89/78912/nhd-0216k1z-ns_rgb_-fbw-rev1_sml.jpg)
NHD-0216K1Z-NS(RGB)-FBW-REV1
Manufacturer Part Number
NHD-0216K1Z-NS(RGB)-FBW-REV1
Description
LCD MOD CHAR 16X2 RGB TRANSM
Manufacturer
Newhaven Display
Specifications of NHD-0216K1Z-NS(RGB)-FBW-REV1
Display Type
FSTN - Film Super-Twisted Nematic
Display Mode
Transmissive
Number Of Digits/alpha
32
Outline L X W X H
80.00mm x 36.00mm x 9.50mm
Viewing Area
64.50mm L x 16.40mm W
Backlight
LED - Red/Green/Blue
Display Format
16 x 2
Character Size
5.23mm H x 3.00mm W
Character Format
5 x 8 Dots
Voltage - Supply
4.7 V ~ 5.5 V
Dot Size
0.56mm W x 0.61mm H
Interface
Parallel
Operating Temperature
-10°C ~ 50°C
Character Count X Line
16 x 2
Module Size (w X H X T)
80 mm x 36 mm x 13 mm
Features
RGB Backlight
Fluid Type
FSTN Negative
Background Color
Red / Green / Blue
Voltage Rating
4.7 V to 5.5 V
Operating Temperature Range
- 20 C to + 70 C
For Use With
NHDEV - BOARD DEV LCD COG TFT 100X95MM
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant
Example Initialization Program
4-bit Initialization:
/**********************************************************/
void command(char i)
{
}
/**********************************************************/
void write(char i)
{
}
/**********************************************************/
void Nybble()
{
}
/**********************************************************/
void init()
{
}
/**********************************************************/
P1 = i;
D_I =0;
R_W =0;
Nybble();
i = i<<4;
P1 = i;
Nybble();
P1 = i;
D_I =1;
R_W =0;
Nybble();
i = i<<4;
P1 = i;
Nybble();
E = 1;
Delay(1);
E = 0;
P1 = 0;
P3 = 0;
Delay(100);
P1 = 0x30;
Delay(30);
Nybble();
Delay(10);
Nybble();
Delay(10);
Nybble();
Delay(10);
P1= 0x20;
Nybble();
command(0x28);
command(0x10);
command(0x0F);
command(0x06);
//put data on output Port
//D/I=LOW : send instruction
//R/W=LOW : Write
//Send lower 4 bits
//Shift over by 4 bits
//put data on output Port
//Send upper 4 bits
//put data on output Port
//D/I=HIGH : send data
//R/W=LOW : Write
//Clock lower 4 bits
//Shift over by 4 bits
//put data on output Port
//Clock upper 4 bits
//enable pulse width
//Clock enable: falling edge
//Wait >15 msec after power is applied
//put 0x30 on the output port
//must wait 5ms, busy flag not available
//command 0x30 = Wake up
//must wait 160us, busy flag not available
//command 0x30 = Wake up #2
//must wait 160us, busy flag not available
//command 0x30 = Wake up #3
//can check busy flag now instead of delay
//put 0x20 on the output port
//Function set: 4-bit interface
//Function set: 4-bit/2-line
//Set cursor
//Display ON; Blinking cursor
//Entry Mode set
[7]
>= 300ns