NHD-0216HZ-FSW-FBW-3V3C Newhaven Display, NHD-0216HZ-FSW-FBW-3V3C Datasheet - Page 12

• Manufacturer Part Number: NHD-0216HZ-FSW-FBW-3V3C
• Description: LCD MOD CHAR 2X16 TRANSFL
• Manufacturer: Newhaven Display

Specifications of NHD-0216HZ-FSW-FBW-3V3C

• Display Type: FSTN - Film Super-Twisted Nematic
• Display Mode: Transflective
• Number Of Digits/alpha: 32
• Outline L X W X H: 65.50mm x 36.70mm x 13.50mm
• Viewing Area: 54.00mm L x 14.40mm W
• Backlight: LED - White
• Display Format: 16 x 2
• Character Size: 4.99mm H x 2.55mm W
• Character Format: 5 x 8 Dots
• Voltage - Supply: 2.7 V ~ 3.3 V
• Dot Size: 0.47mm W x 0.58mm H
• Interface: Parallel
• Operating Temperature: -20°C ~ 70°C
• Character Count X Line: 16 x 2
• Module Size (w X H X T): 65.5 mm x 36.7 mm x 13.5 mm
• Fluid Type: FSTN Positive
• Voltage Rating: 3.3 V
• Operating Temperature Range: - 20 C to + 70 C
• Backlight Type: Side LED White
• For Use With: NHDEV - BOARD DEV LCD COG TFT 100X95MM
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

NHD-0216HZ-FSW-FBW-3V3C
Write binary 8-bit data to DDRAM/CGRAM.
The selection of RAM from DDRAM, and CGRAM, is set by the previous address set instruction (DDRAM
address set, CGRAM address set).
RAM set instruction can also determine the AC direction to RAM.
After write operation. The address is automatically increased/decreased by 1, according to the entry mode.
Read binary 8-bit data from DDRAM/CGRAM.
is not performed before this instruction, the data that has been read first is invalid, as the direction of AC is not
yet determined. If RAM data is read several times without RAM address instructions set before, read operation,
the correct RAM data can be obtained from the second. But the first data would be incorrect, as there is no
time margin to transfer RAM data.
instruction, it also transfers RAM data to output data register.
mode.
NOTE: In case of RAM write operation, AC is increased/decreased by 1 as in read operation.
instruction.
12.Display character address code:
11) Read data from RAM
The selection of RAM is set by the previous address set instruction. If the address set instruction of RAM
In case of DDRAM read operation, cursor shift instruction plays the same role as DDRAM address set
After read operation, address counter is automatically increased/decreased by 1 according to the entry
After CGRAM read operation, display shift may not be executed correctly.
RS
At this time, AC indicates next address position, but only the previous data can be read by the read
1
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4E 4F
1
R/W
1
2
3
DB7
D7
4
5
DB6
D6
6
7
DB5
D5
8
9
DB4
D4
10 11
DB3
D3
12
Newhaven Display
13
DB2
D2
14
15
DB1
D1
16
DB0
D0