LK162-12-R Matrix Orbital, LK162-12-R Datasheet - Page 12
![LCD ALPHA/NUM DISPL 16X2 BK/RED](/photos/7/89/78978/lk162-12-r_sml.jpg)
LK162-12-R
Manufacturer Part Number
LK162-12-R
Description
LCD ALPHA/NUM DISPL 16X2 BK/RED
Manufacturer
Matrix Orbital
Series
LK162-12r
Datasheet
1.LK162-12-WB.pdf
(61 pages)
Specifications of LK162-12-R
Display Type
LCD - Monochrome
Display Mode
*
Number Of Digits/alpha
32
Outline L X W X H
80.00mm x 36.00mm x 28.82mm
Viewing Area
64.50mm L x 17.50mm W
Display Format
16 x 2
Character Size
5.55mm H x 2.95mm W
Character Format
5 x 8 Dots
Voltage - Supply
5.0V
Interface
I²C, RS232, TTL
Operating Temperature
0°C ~ 50°C
Character Count X Line
16 x 2
Module Size (w X H X T)
80 mm x 36 mm x 27.5 mm
Fluid Type
STN
Background Color
Black
Backlight Type
LED Red
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Backlight
-
Dot Size
-
Lead Free Status / Rohs Status
Details
Other names
635-1013
2.3 Protocol Select Jumpers
display module between RS-232, TTL and I
with jumps on the 232 jumpers. In order to place the display module in I
the jumps from the 232 jumpers and then place them on the I2C jumpers. The display will now be in I
mode and have a default slave address of 0x50 unless it has been changed. Similarly, in order to change the
display to TTL mode, simply remove the zero ohm resistors from the 232 or I
the TTL jumpers.
Matrix Orbital
The Protocol Select Jumpers, pictured below in
Backlight On Supply
Backlight Off Supply
Supply Voltage
WARNINGS
• Do not apply any power with reversed polarization.
• Do not apply any voltage other than the specified voltage.
Figure 13: Power Connector and Pin out
Table 1: Power Requirements
+5Vdc ±0.25V
2
Standard
C protocols. As a default, the jumpers are set to RS-232 mode
LK162-12
Pin
Pin
Pin
Pin
figure 14
1
2
3
4
115 mA typical
PWR
Rx \ SCL (I
Tx \ SDA (I
GND
+9V to +15V
, provide the means necessary to toggle the
9 mA
(See table 1)
-V
2
2
C clock)
C data)
2
C mode you must first remove
2
+9V to +35V
C jumpers and solder them to
-VPT
2
C
8