DMC-16207H Optrex America Inc, DMC-16207H Datasheet - Page 9
![no-image](/images/no-image-200.jpg)
DMC-16207H
Manufacturer Part Number
DMC-16207H
Description
LCD MODULE 16X2 CHARACTER
Manufacturer
Optrex America Inc
Series
DMC-16207r
Specifications of DMC-16207H
Display Type
TN - Twisted Nematic
Display Mode
Reflective
Viewing Area
62.00mm L x 16.00mm W
Backlight
Without Backlight
Display Format
16 x 2
Character Size
5.55mm H x 2.95mm W
Character Format
5 x 8 Dots
Voltage - Supply
+5 V, -7 V
Dot Size
0.55mm W x 0.55mm H
Operating Temperature
-20°C ~ 70°C
Interface
-
Number Of Digits/alpha
-
Outline L X W X H
-
Other names
73-1036
DMC16207H
OP2167H
DMC16207H
OP2167H
Note 1 : Unless otherwise specified, tests will be conducted under the following condition.
Note 2 : Unless otherwise specified, tests will be not conducted under functioning state.
Note 3 : No dew condensation to be observed.
Note 4 : The function test shall be conducted after 4 hours storage at the normal temperature and humidity
Note 5 : Vibration test will be conducted to the product itself without putting it in a container.
No.
5.Test
1
2
3
4
5
6
7
DMC16207H* (CN) No.2000-0090
No change on display and in operation under the following test condition.
after removed from the test chamber.
High Temperature Operating
Low Temperature Operating
High Temperature Storage
Low Temperature Storage
Damp Proof Test
Vibration Test
Shock Test
Temperature : 20±5℃
Humidity
Parameter
: 65±5%
70℃±2℃, 96hrs (operation state)
-20℃±2℃, 96hrs (operation state)
80℃±2℃, 96hrs
-30℃±2℃, 96hrs
60℃±2℃, 85~90%RH, 96hrs
Total fixed amplitude : 1.5mm
Vibration Frequency : 10~55Hz
One cycle 60 seconds to 3 directions of X, Y, Z for
each 15 minutes
To be measured after dropping from 60cm high on
the concrete surface in packing state.
E
B
OPTREX
60cm
G
Concrete Surface
OPTREX CORPORATION
D
A
Conditions
C
F
Dropping method corner dropping
Edge dropping
Face dropping
A corner : once
B,C,D edge : once
E,F,G face : once
Page 9/15
Notes
3, 4
3, 4
3
4
5