NHD-160128WG-BTMI-VZ#-1 Newhaven Display, NHD-160128WG-BTMI-VZ#-1 Datasheet - Page 27

• Manufacturer Part Number: NHD-160128WG-BTMI-VZ#-1
• Description: LCD MOD GRAPH 160X128 WH TRANSFL
• Manufacturer: Newhaven Display

Specifications of NHD-160128WG-BTMI-VZ#-1

• Display Type: STN - Super-Twisted Nematic
• Display Mode: Transflective
• Viewing Area: 101.00mm L x 82.00mm W
• Backlight: LED - White
• Dot Size: 0.56mm W x 0.56mm H
• Dot Pitch: 0.60mm x 0.60mm
• Dot Pixels: 160 x 128
• Pixel Density: 160 x 128
• Fluid Type: STN Negative
• Module Size (w X H X T): 129 mm x 102 mm x 14 mm
• Backlighting: LED White
• Background Color: Blue
• Operating Temperature Range: - 20 C to + 70 C
• Style: LCD Graphic Display
• Interface: Parallel
• For Use With: NHDEV - BOARD DEV LCD COG TFT 100X95MM
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: NHD-160128WG-BTMI-VZ#; NHD-160128WG-BTMI-VZ# ; NHD-160128WG-BTMI-VZ#

10110010
B2H
Auto Reset
The command is convenient for sending a full screen of data from the external display RAM. After setting
Auto mode, a Data Write (or Read) command is need not be sent between each datum. A Data Auto Write
(or Read) command must be sent after a Set Address Pointer command. After this command, the address
pointer is automatically incremented by 1 after each datum. In Auto mode, the T6963C cannot accept any
other commands.
The Auto Reset command must be sent to the T69963C after all data has been sent, to clear Auto mode.
(Note)A Status check for Auto mode
(STA2, STA3 should be checked between sending of each datum. Auto Reset should be performed
after checking STA3=1 (STA2=1.) Refer to the following flowchart.
a)Auto Read mode
b)Auto Write mode
Page 29 of 49