NHD-16032AZ-NSW-BBW Newhaven Display, NHD-16032AZ-NSW-BBW Datasheet - Page 20

• Manufacturer Part Number: NHD-16032AZ-NSW-BBW
• Description: LCD MOD GRAPH 160X32 WHI TRANSM
• Manufacturer: Newhaven Display

Specifications of NHD-16032AZ-NSW-BBW

• Display Type: LCD - Monochrome
• Display Mode: Transmissive
• Viewing Area: 64.50mm L x 16.40mm W
• Backlight: LED - White
• Dot Size: 0.49mm W x 0.49mm H
• Dot Pitch: 0.54mm x 0.54mm
• Dot Pixels: 160 x 32
• Interface: Parallel/Serial
• Pixel Density: 160 x 32
• Fluid Type: STN Negative
• Module Size (w X H X T): 114 mm x 44 mm x 13.5 mm
• Backlighting: LED White
• Operating Temperature Range: - 20 C to + 70 C
• Product: Graphic LCD Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

NHD-16032AZ-NSW-BBW
No.
11*
10
7
8
9
Segment
pattern
W = Segment width
I = (X+Y)/2
Back-light
Soldering
Wire
PCB
Item
(1) Pin hole
(1) The color of backlight should correspond its
(2) Not allow flickering
(1) Not allow heavy dirty and solder ball on PCB.
(The size of dirty refer to point and dust defect)
(2) Over 50% of lead should be soldered on Land.
(1) Copper wire should not be rusted
(2) Not allow crack on copper wire connection.
(3) Not allow reversing the position of the flat cable.
(4) Not allow exposed copper wire inside the flat cable.
(1) Not allow screw rust or damage.
(2) Not allow missing or wrong putting of component.
Y
specification.
I < 0.10mm is acceptable.
W
X
Land
20 / 23
Y
X
1/4W
I＞1/2W
Criterion
Point Size
I≤1/4W
I≤1/2W
Lead
NEWHAVEN DISPLAY
Acceptable Qty
Unit: mm
50% lead
Disregard
1
0