T-51750GD065J-FW-AA Optrex America Inc, T-51750GD065J-FW-AA Datasheet - Page 18

• Manufacturer Part Number: T-51750GD065J-FW-AA
• Description: LCD 6.5" TFT MOD 640X480 VGA
• Manufacturer: Optrex America Inc

Specifications of T-51750GD065J-FW-AA

• Display Type: TFT- Thin Film Transistor
• Display Mode: Transmissive
• Viewing Area: 132.50mm L x 99.40mm W
• Backlight: CCFL - White
• Dot Pixels: 640 x 480 (VGA)
• Interface: TTL
• Attached Touch Screen: No
• Diagonal: 165.1 mm
• Viewing Area (w X H): 132.5 mm x 99.4 mm
• Pixel Density: 640 x 480
• Module Size (w X H X T): 158 mm x 120.4 mm x 11.6 mm
• Backlighting: CCFL White
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With: TK065V01 - TOOLKIT TFT 6.5" VGA
• Dot Size: -
• Dot Pitch: -
• Lead Free Status / Rohs Status: No RoHS Version Available
• Other names: 73-1243

No.
5. Test
Conditions:
Note 1: No dew condensation to be observed.
Note 2: The function test shall be conducted after 4 hours storage at the normal
Note 3: Vibration test will be conducted to the product itself without putting it in a container.
1
2
3
4
5
6
7
8
T-51750GD065J-FW-AA (AA) No. 2003-0199
No change on display and in operation under the following test condition.
High Temperature Operating
Low Temperature Operating
High Temperature Storage
Low Temperature Storage
Damp Proof Test
Vibration Test
Shock
Shock Test
Temperature and humidity after removed from the test chamber.
tests will be not conducted under functioning state.
Unless otherwise specified, tests will be conducted under the following condition.
Temperature: 20 5 C
Humidity : 65 5%RH
Parameter
60 C, 96hrs (operation state)
0 C, 96hrs (operation state)
70 C, 96hrs
-25 C, 96hrs
40 C,90~95%RH, 96hrs
Frequency:10-57Hz/Vibration width(one side):0.075mm
Sweep time:11minutes
Test period:3hrs for each direction of X,Y,Z
Shock level:490m/s
Waveform:half sinusoidal wave, 11ms
Number of shocks :
To be measured after dropping from 60cm high on
the concrete surface in packing state.
One shock input in each direction of three mutually
perpendicular axis for a total of six shock inputs
E
B
:58-500Hz/Gravity:9.8m/s
60cm
G
OPTREX CORPORATION
Concrete Surface
D
A
2
Conditions
C
F
Dropping method corner dropping
Edge dropping
Face dropping
A corner : once
B,C,D edge : once
E,F,G face : once
2
Page 18/24
Notes
1,2
1,2
1
2
3