GLK19264-7T-1U-WB-LV-E Matrix Orbital, GLK19264-7T-1U-WB-LV-E Datasheet - Page 41

• Manufacturer Part Number: GLK19264-7T-1U-WB-LV-E
• Description: LCD GRAPHIC DISPL 192X64 WH BLU
• Manufacturer: Matrix Orbital
• Series: GLK19264-7T-1Ur

Specifications of GLK19264-7T-1U-WB-LV-E

• Display Type: LCD - Monochrome
• Display Mode: Reflective
• Viewing Area: 82.00mm x 28.40mm
• Backlight: LED - Blue
• Dot Pixels: 192 x 64
• Interface: RS232
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Dot Size: -
• Dot Pitch: -
• Other names: Q3815068

9.3 General Purpose Output On
9.4 Set Startup GPO state
10 Keypad
10.1 Introduction
to allow key presses to be automatically transmitted via RS-232 or polled through I
1U also allows for auto-repeating key presses. The keypad is scanned whenever a key is pressed;there is
no continuous key scan. This means that key presses are dealt with immediately without any appreciable
latency. This also prevents electrical noise which is often caused by continuous key scans.
Matrix Orbital
The GLK19264-7T-1Usupports up to a 7 Key, matrix style, embedded keypad and may be configured
The keypad is tactile with seven keys. The value of each key is listed in the table below.
Syntax
Parameters
Description
Remembered
Syntax
Parameters
Description
Remembered
This command turns ON general purpose output [num]. The standard
GPO’s on the GLK19264-7T-1U output 20mA of current at 5V.
NOTE ON means the output is pulled HIGH.
Yes
This command will set the startup state for the GPO on the next power
up. A value of one will cause the GPO to be off on the next startup
while a value of one will cause the GPO to be on.
NOTE This command does not affect the current state of the GPO.
Always
Hexadecimal
Decimal
ASCII
Parameter
Num
Hexadecimal
Decimal
Parameter
Num
state
GLK19264-7T-1U
0xFE 0x57 [Num]
254 87 [Num]
254 “W” [Num]
0xFE 0xC3 [Num] [state]
254 195 [Num] [state]
Length
Length
1
1
1
Description
GPO number.
Description
GPO number.
Startup state (0: Off, 1: On)
2
C. The GLK19264-7T-
36