SFH4501 OSRAM Opto Semiconductors Inc, SFH4501 Datasheet - Page 9

• Manufacturer Part Number: SFH4501
• Description: EMITTER IR 950NM 5MM HI SPEED
• Manufacturer: OSRAM Opto Semiconductors Inc

Specifications of SFH4501

• Current - Dc Forward (if): 100mA
• Radiant Intensity (ie) Min @ If: 50mW/sr @ 100mA
• Wavelength: 950nm
• Voltage - Forward (vf) Typ: 1.5V
• Viewing Angle: 14°
• Orientation: Top View
• Mounting Type: Through Hole
• Package / Case: T 1 3/4
• Other names: 475-1102; Q62702P5061; SFH 4501

Lötbedingungen
Soldering Conditions
Lötbad-
temperatur
Temperature
of the
Soldering
Bath
260 C
Published by OSRAM Opto Semiconductors GmbH & Co. OHG
Wernerwerkstrasse 2, D-93049 Regensburg
© All Rights Reserved.
Attention please!
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved. Due to technical requirements components may contain
dangerous substances. For information on the types in question please contact our Sales Organization.
Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office.
By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing
material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs
incurred.
Components used in life-support devices or systems must be expressly authorized for such purpose! Critical
components
1
to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system.
2
and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered.
2001-03-09
A critical component is a component usedin a life-support device or system whose failure can reasonably be expected
Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain
Tauch-, Schwall- und Schlepplötung
Dip, Wave and Drag Soldering
1
, may only be used in life-support devices or systems
Maximal
zulässige
Lötzeit
Max. Perm.
Soldering
Time
10 s
Abstand
Lötstelle –
Gehäuse
Distance
between
Solder Joint
and Case
1.5 mm
9
Temperatur
des Kolbens
Temperature
of the
Soldering Iron
300 C
Kolbenlötung (mit 1,5-mm-Kolbenspitze)
2
Iron Soldering (with 1.5-mm-bit)
with the express written approval of OSRAM OS.
SFH 4501, SFH 4502, SFH 4503
Maximale
zulässige
Lötzeit
Max.
Permissible
Soldering
Time
3 s
Abstand
Lötstelle –
Gehäuse
Distance
between
Solder Joint
and Case
1.5 mm