LTST-C170AKT Lite-On Electronics, LTST-C170AKT Datasheet - Page 9
![LED AMBER CLEAR 0805 SMD](/photos/8/6/80605/ltst-c170ykt_ltst-c170ckt_ltst-c170akt_ltst-c170ekt_ltst-c170gkt_sml.jpg)
LTST-C170AKT
Manufacturer Part Number
LTST-C170AKT
Description
LED AMBER CLEAR 0805 SMD
Manufacturer
Lite-On Electronics
Type
Uni-Colorr
Specifications of LTST-C170AKT
Led Size
2 mm x 1.25 mm
Illumination Color
Amber
Lens Color/style
Water Clear
Operating Voltage
2.1 V
Wavelength
602 nm
Luminous Intensity
2.5 mcd
Mounting Style
SMD/SMT
Operating Current
20 mA
Lens Dimensions
1.4 mm x 1.25 mm
Lens Shape
Rectangular
Maximum Operating Temperature
+ 85 C
Minimum Operating Temperature
- 55 C
Peak Wavelength
610 nm
Package / Case
0805 (2012 Metric)
Viewing Angle
130°
Color
Orange
Millicandela Rating
2mcd
Current - Test
10mA
Wavelength - Dominant
602nm
Wavelength - Peak
610nm
Voltage - Forward (vf) Typ
2.1V
Lens Type
Clear
Lens Style/size
Rectangle, 1.4mm x 1.25mm
Size / Dimension
2.00mm L x 1.25mm W
Height
1.10mm
Mounting Type
Surface Mount
Resistance Tolerance
602nm
Package Type
Chip Led
Emitting Color
Orange
Test Current (it)
10mA
Forward Current
30mA
Dominant Wave Length
602nm
Forward Voltage
2.6V
Product Length (mm)
2mm
Product Height (mm)
1.1mm
Product Depth (mm)
1.25mm
Mounting
Surface Mount
Shape Type
Rectangular
Chip Material
GaAsP
Main Category
Chip LED
Number Of Elements
1
Pin Count
2
Operating Temperature Classification
Industrial
Operating Temp Range
-55C to 85C
Reverse Voltage
5V
Power Dissipation
100mW
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Luminous Flux @ Current - Test
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
160-1177-2
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
LTST-C170AKT
Manufacturer:
LITEON
Quantity:
40 000
BNS-OD-C131/A4
Part
1. Application
2. Storage
3. Cleaning
4. Soldering
5. Drive Method
6. ESD (Electrostatic Discharge)
Static Electricity or power surge will damage the LED.
Suggestions to prevent ESD damage:
The LEDs described here are intended to be used for ordinary electronic equipment (such as office
equipment, communication equipment and household applications).Consult Liteon’s Sales in advance
for information on applications in which exceptional reliability is required, particularly when the failure
or malfunction of the LEDs may directly jeopardize life or health (such as in aviation, transportation,
traffic control equipment, medical and life support systems and safety devices).
The storage ambient for the LEDs should not exceed 30°C temperature or 70% relative humidity.
It is recommended that LEDs out of their original packaging are IR-reflowed within one week.
For extended storage out of their original packaging, it is recommended that the LEDs be stored in a
sealed container with appropriate desiccant, or in a desiccators with nitrogen ambient.
LEDs stored out of their original packaging for more than a week should be baked at about 60 deg C
for at least 24 hours before solder assembly.
Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED if necessary.
Recommended soldering conditions:
An LED is a current-operated device. In order to ensure intensity uniformity on multiple LEDs
connected in parallel in an application, it is recommended that a current limiting resistor be incorporated
in the drive circuit, in series with each LED as shown in Circuit A below.
(A) Recommended circuit.
(B) The brightness of each LED might appear different due to the differences in the I-V characteristics
Pre-heat
Pre-heat time
Peak temperature
Soldering time
Use of a conductive wrist band or anti-electrostatic glove when handling these LEDs.
All devices, equipment, and machinery must be properly grounded.
Work tables, storage racks, etc. should be properly grounded.
Use ion blower to neutralize the static charge which might have built up on surface of the LED’s
plastic lens as a result of friction between LEDs during storage and handling.
No. : LTST-C170AKT
of those LEDs.
Reflow soldering
Circuit model A
120~150°C
120 sec. Max.
240°C Max.
10 sec. Max.
LITE-ON TECHNOLOGY CORPORATION
LED
P r o p e r t y o f L i t e - O n O n l y
Pre-heat
Pre-heat time
Solder wave
Soldering time
CAUTIONS
Wave Soldering
100°C Max.
60 sec. Max.
260°C Max.
10 sec. Max.
Circuit model B
LED
Temperature
Soldering time
Page :
Soldering iron
9
300°C Max.
3 sec. Max.
(one time only)
of
10