XPEBLU-L1-R250-00Y01 Cree Inc, XPEBLU-L1-R250-00Y01 Datasheet - Page 6

• Manufacturer Part Number: XPEBLU-L1-R250-00Y01
• Description: LED BLUE 475NM XLAMP WTR CLR SMD
• Manufacturer: Cree Inc
• Series: Xlamp® XP-Er

Specifications of XPEBLU-L1-R250-00Y01

• Viewing Angle: 130°
• Color: Blue
• Current - Test: 350mA
• Luminous Flux @ Current - Test: 33lm
• Current - Max: 1A
• Lumens @ Current - Max: 79lm
• Lumens/watt @ Current - Test: 29lm/W
• Voltage - Forward (vf) Typ: 3.2V
• Wavelength: 475nm
• Lens Style/size: Round, 2.6mm
• Mounting Type: Surface Mount
• Package / Case: 0.14" L x 0.14" W x 0.08" H (3.45mm x 3.45mm x 2mm)
• Led Color: Blue
• Luminous Flux @ Test: 35.2lm
• Wavelength Typ: 485nm
• Forward Current @ Test: 350mA
• Forward Current If Max: 1A
• Forward Voltage @ Test: 3.2V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 876-1003 - LM3406 LED DRIVER EVAL BOARD
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: XPEBLU-L1-R250-00Y01TR

Reflow Soldering Characteristics
In testing, Cree has found XLamp XP-E
LEDs to be compatible with JEDEC J-STD-
020C, using the parameters listed below.
As a general guideline, Cree recommends
that users follow the recommended solder-
ing profile provided by the manufacturer of
solder paste used.
Note that this general guideline may not
apply to all PCB designs and configurations
of reflow soldering equipment.
Note: All temperatures refer to topside of the package, measured on the package body surface.
Notes
RoHS Compliance
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or other-
wise restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/
EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as
amended through April 21, 2006.
Vision Advisory Claim
Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change
without notice. Cree, the Cree logo, and XLamp are registered trademarks of Cree, Inc.
This is a preliminary, non-binding product specification provided for informational purposes only and is
subject to change without notice. This product is unreleased and is provided “as is” without warranty.
Profile Feature
Average Ramp-Up Rate (Ts
Preheat: Temperature Min (Ts
Preheat: Temperature Max (Ts
Preheat: Time (ts
Time Maintained Above: Temperature (T
Time Maintained Above: Time (t
Peak/Classification Temperature (Tp)
Time Within 5°C of Actual Peak Temperature (tp)
Ramp-Down Rate
Time 25°C to Peak Temperature
6
CLD-DS21.preliminary
min
to ts
max
max
)
min
to Tp)
max
)
L
)
)
L
)
August 19, 2009
Preliminary
Lead-Based Solder
3°C/second max.
6°C/second max.
60-120 seconds
60-150 seconds
6 minutes max.
10-30 seconds
100°C
150°C
183°C
215°C
Lead-Free Solder
3°C/second max.
6°C/second max
60-180 seconds
60-150 seconds
8 minutes max.
20-40 seconds
USA Tel: [phone]
150°C
200°C
217°C
260°C
www.cree.com/xlamp
Durham, NC 27703
4600 Silicon Drive
Cree, Inc.