AAD1-9090QB11ZC/3 Kingbright Corp, AAD1-9090QB11ZC/3 Datasheet - Page 2

• Manufacturer Part Number: AAD1-9090QB11ZC/3
• Description: LED 3W HIGH POWER BLUE SMD
• Manufacturer: Kingbright Corp

Specifications of AAD1-9090QB11ZC/3

• Viewing Angle: 100°
• Color: Blue
• Current - Test: 700mA
• Luminous Flux @ Current - Test: 35.7lm
• Current - Max: 700mA
• Lumens @ Current - Max: 36lm
• Lumens/watt @ Current - Test: 13lm/W
• Voltage - Forward (vf) Typ: 3.9V
• Wavelength: 460nm
• Lens Style/size: Round, 7.7mm
• Mounting Type: Surface Mount
• Package / Case: 0.35" L x 0.35" W x .25" H (9mm x 9mm x 6.4mm)
• Illumination Color: Blue
• Wavelength/color Temperature: 460 nm
• Luminous Flux: 35.7 lm
• Luminous Intensity: 10 cd
• Power Rating: 3 W
• Operating Voltage: 3.9 V
• Operating Current: 700 mA
• Minimum Operating Temperature: - 40 C
• Maximum Operating Temperature: + 100 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 876-1003 - LM3406 LED DRIVER EVAL BOARD
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 754-1317-2

SPEC NO: DSAH5607
APPROVED: WYNEC
5. As silicone encapsulation is permeable to gases, some corrosive substances such as H
leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances.
3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or
1. Handle the component along the side surfaces by using forceps or appropriate tools.
2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
4.1. The outer diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. The inner
4.2. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup.
4.3. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup
Handling Precautions
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic
significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.
As a result, special handling precautions need to be observed during assembly using silicone encapsulated
LED products. Failure to comply might lead to damage and premature failure of the LED.
damage the internal circuitry.
and avoid damage during production.
diameter of the nozzle should be as large as possible.
CHECKED: Allen Liu
REV NO: V.3
DRAWN: D.M.Su
DATE: MAR/03/2011
2
S might corrode silver plating of
PAGE: 2 OF 7
ERP:1201200258