BXRA-W1200-00000 Bridgelux, BXRA-W1200-00000 Datasheet - Page 30

• Manufacturer Part Number: BXRA-W1200-00000
• Description: LED ARRAY WARM WHITE 1320LM
• Manufacturer: Bridgelux
• Series: LEDr
• Type: Without Connectorr

Specifications of BXRA-W1200-00000

• Color: White, Warm
• Luminous Flux @ Current - Test: 1320 lm
• Current - Test: 1.6A
• Current - Max: 2.5A
• Driver Circuitry: No
• Voltage: 16.4V
• Wavelength: 3000K
• Configuration: Square
• With Connector: No
• Voltage - Input: 16.4V
• Led Color: Warm White
• Luminous Flux @ Test: 1320lm
• Cct: 3700K
• Forward Current @ Test: 1.6A
• Forward Current If Max: 2.5A
• Forward Voltage @ Test: 16.4V
• Viewing Angle: 120°
• Led Mounting: SMD
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Interface: -
• Power - Input: -
• Other names: 976-1030

Mechanical Assembly and Handling
Recommended assembly is illustrated below.
When handling parts, please do not apply stress to the resin and avoid any contact on the resin area (see
drawing).
Product should be firmly secured onto appropriate heat sink by fastening M2.5 or #4 screws on both sides
of the product (see drawing). Bridgelux recommends the use of hard non-electrically conductive flat
washers with lock washers. Refer to Application Note AN11 for more details.
A thin layer of thermal grease should be applied to the bottom surface of the array, between the bottom of
the array and the heat sink. All air gaps and voids between the heat sink and array should be eliminated.
Ensure that sufficient thermal grease is used to cover the entire bottom surface of the array, but not so
much that the thermal grease creeps up to the top of the array.
For the Hexagonal star products, preferred locations for screw mounting are indicated in the figure below.
Bridgelux LED Array Data Sheet DS10 (10/11/11)
Figure 33: Recommended Assembly Method
Figure 34: Recommended Mounting
Locations for Hexagonal Star Products
Drawing Not to Scale
Page 30 of 35