M22-FA-12A Omron, M22-FA-12A Datasheet - Page 247
![no-image](/images/manufacturer_photos/0/4/494/omron_sml.jpg)
M22-FA-12A
Manufacturer Part Number
M22-FA-12A
Description
PILOT LIGHT 12V LED ROUND BLUE
Manufacturer
Omron
Series
M22r
Type
LEDr
Specifications of M22-FA-12A
Lens Color
Blue
Panel Cutout Dimensions
22mm (Round)
Voltage
12V
Shape
Round
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
M22FA12A
- Current page: 247 of 265
- Download datasheet (11Mb)
A3P
Precautions
Refer to the Common Precautions for Pushbutton Switches on
page 14.
Correct Use
Mounting
Always make sure that the power is turned OFF before mounting,
removing, or wiring the Switch, or performing maintenance.
After wiring the Switch, make sure that there is a suitable isolation
distance.
Wiring
Perform soldering promptly and correctly at 60 W maximum and
within 3 seconds. (Dip soldering temperature 280_C max.) Wait for
one minute after soldering before exerting any external force on the
solder.
Operating Environment
Do not use in locations that are subject to dust, oil, or metal filings as
these may penetrate the interior of the Switch and cause malfunc-
tion.
LED (for VDC)
Check the terminal polarity when wiring.
The rated voltage is shown on the plate on the back of the lighting
unit, so be sure to use within the voltage shown.
An LED current-limiting resistor is built in, so there is no need to
mount an external resistor.
Incandescent Lamp
Apply 80% of the rated voltage (operating voltage) to the incandes-
cent lamp to improve life expectancy and incandescence.
Character Plate (Character Film)
If preparing the character plate separately, use a heat-resistant film
with a thickness of 0.1 to 0.3 mm.
Do not apply a voltage higher than the maximum rated operat-
ing voltage between the lamp terminals, as there is a risk that
the incandescent lamp or LED will be damaged, and the Push-
button will be ejected.
When replacing the incandescent lamp, first turn OFF the
power supply, and then wait 10 minutes before performing re-
placement, as the lamp is still hot immediately after the power
is turned OFF, so there is a risk of burns.
!
Caution
24.8
–0.3
+0.
dia.
23±0.1 dia.
Using Microloads
Using a standard load switch when a microload circuit is opened or
closed may cause wear on the contacts. Use the switch within the
operating range. (Refer to the diagram below.) Even when using mi-
croload models within the operating range shown below, if inrush
current occurs when the contact is opened or closed, it may cause
the contact surface to become rough, and so decrease life expec-
tancy. Therefore, insert a contact protection circuit where neces-
sary. The minimum applicable load is the N-level reference value.
This value indicates the malfunction reference level for the reliability
level of 60% (λ 60) (conforming to JIS C5003). The equation, λ 60 =
0.5 x 10
than 1/2,000,000 with a reliability level of 60%.
Others
If the panel is to be finished (e.g., coated), make sure that the panel
meets the specified dimensions after the coating.
–4
/time indicates that the estimated malfunction rate is less
Invalid
area
Microload
area
Current (mA)
Standard
load area
A3P
245
Related parts for M22-FA-12A
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
![M22-FA-T1](/photos/8/37/83757/m22-fa-24a__m22-fa-t1_tmb.jpg)
Part Number:
Description:
PILOT LIGHT 110V LED ROUND BLUE
Manufacturer:
Omron
Datasheet:
![M22-FA-24A](/photos/8/37/83757/m22-fa-24a__m22-fa-t1_tmb.jpg)
Part Number:
Description:
PILOT LIGHT 24V LED ROUND BLUE
Manufacturer:
Omron
Datasheet:
![M22-FA-6](/images/manufacturer_photos/0/4/494/omron_tmb.jpg)
Part Number:
Description:
PILOT LIGHT ROUND BLUE 6V
Manufacturer:
Omron
Datasheet:
![M22-FA-6A](/images/manufacturer_photos/0/4/494/omron_tmb.jpg)
Part Number:
Description:
PILOT LIGHT 6VAC LED ROUND BLUE
Manufacturer:
Omron
Datasheet:
![M22-FA-6D](/images/manufacturer_photos/0/4/494/omron_tmb.jpg)
Part Number:
Description:
PILOT LIGHT 6VDC LED ROUND BLUE
Manufacturer:
Omron
Datasheet:
![M22-FA-T2](/images/manufacturer_photos/0/4/494/omron_tmb.jpg)
Part Number:
Description:
PILOT LIGHT 220V INCAND RND BLUE
Manufacturer:
Omron
Datasheet:
![M22-FA-12](/images/manufacturer_photos/0/4/494/omron_tmb.jpg)
Part Number:
Description:
PILOT LIGHT 12V INCAND ROUND BLU
Manufacturer:
Omron
Datasheet:
![M22-FA-24](/images/manufacturer_photos/0/4/494/omron_tmb.jpg)
Part Number:
Description:
PILOT LIGHT 24V INCAND ROUND BLU
Manufacturer:
Omron
Datasheet:
![M22-FA-5](/images/manufacturer_photos/0/4/494/omron_tmb.jpg)
Part Number:
Description:
PILOT LIGHT 5V INCAND ROUND BLUE
Manufacturer:
Omron
Datasheet:
![M22-FA](/images/manufacturer_photos/0/4/494/omron_tmb.jpg)
Part Number:
Description:
SWITCH UNIT ROUND M22 SERIES BLU
Manufacturer:
Omron
Datasheet:
![M22-7132042](/photos/1/96/19639/mfg_m22-713_tmb.jpg)
Part Number:
Description:
CONN RECEPT 2MM VERT AU 20POS
Manufacturer:
Harwin Inc
Datasheet:
![M22-7130442](/photos/1/96/19639/mfg_m22-713_tmb.jpg)
Part Number:
Description:
CONN RECEPT 2MM VERT AU 4POS
Manufacturer:
Harwin Inc
Datasheet:
![M22-7140342](/photos/1/97/19752/mfg_m22-714_tmb.jpg)
Part Number:
Description:
CONN RECEPT 2MM VERT AU 6POS
Manufacturer:
Harwin Inc
Datasheet:
![M22-7130542](/photos/1/96/19639/mfg_m22-713_tmb.jpg)
Part Number:
Description:
CONN RECEPT 2MM VERT AU 5POS
Manufacturer:
Harwin Inc
Datasheet:
![M22-7140442](/photos/1/97/19752/mfg_m22-714_tmb.jpg)
Part Number:
Description:
CONN RECEPT 2MM VERT AU 8POS
Manufacturer:
Harwin Inc
Datasheet: