CC25-2405SF-E TDK Corporation, CC25-2405SF-E Datasheet - Page 9

• Manufacturer Part Number: CC25-2405SF-E
• Description: CONV DC/DC 25W SNGL 24V 5V PCB
• Manufacturer: TDK Corporation
• Series: CC-Er
• Type: Isolatedr

Specifications of CC25-2405SF-E

• Output: 5V
• Number Of Outputs: 1
• Power (watts): 25W
• Mounting Type: Through Hole
• Voltage - Input: 18 ~ 36V
• Package / Case: 30-DIP Module (25 Leads)
• 1st Output: 5 VDC @ 5A
• Size / Dimension: 1.77" L x 1.70" W x 0.28" H (44.9mm x 43.2mm x 7mm)
• Power (watts) - Rated: 25W
• Operating Temperature: -40°C ~ 85°C
• Efficiency: 90%
• Approvals: CSA, cUL, EN, UL
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• 3rd Output: -
• 2nd Output: -
• 4th Output: -
• Other names: 445-2461; CC252405SFE

TDK CORPORATION
[8] Functions
8-1. On/Off function(RC)
8-2. Output Voltage Adjustment
8-3. Output Over Current Protection(OCP) :
8-6. Under Voltage Lock out
8-7. Input Circuit Protection :
8-4. Output Over Voltage Protection :
8-5. Output Under Voltage Protection :
The converter can be turned on or off by using RC terminal(4 pin).
Output voltage can be adjusted up or down by connecting a resistor between Output TRM pin
and the output (+Vin or -Vin) as shown below.
When the RC terminal is connected to the +Vin terminal the current is 250uA or less
This product is equipped with a low input voltage protection circuit in order to prevent miss-operation
when the input voltage is low. The converter stops operating when it falls below the voltage setting.
The setting range is shown in the table below.
It is impossible to adjust the output voltage.
OCP is activated and shut off when output Over Current (OC) is detected (105 to 250% of output current).
Converter is not auto recovery.
If you release the latch condition, please restart the converter.
On function / Start operation: RC terminal is Low ( 0 ~ 0.4 with respect to -Vin)
Off function / Stop operation: RC terminal is Open or High
Note:
The converters are equipped with input fuse. Fuses rating and capacity are shown in below table
RC Current : external circuitry requires to sink maximum of 1mA during on function.
RC Voltage: Maximum voltage is +Vin
This converter does not have an output over voltage protection function.
Consult your TDK representative for recommendation of adding external circuitry to RC terminal.
CC25-24xxxF-E
CC25-24xxxF-E
This converter does not have an output over voltage protection function.
Consult your TDK representative for recommendation of adding external circuitry to RC terminal.
Product
Product
No.
Low Input Voltage Protection
PRODUCT SPECIFICATIONS
Rated Current
3.15A
NAME OF DRAWING
Setting Range
MATERIAL NAME
12-18V
DC-DC CONVERTER UNIT CC25-xxxxxF-E Series
Fusing Current
6.3 or more
PRODUCT NAME or MODEL,TITLE
QU
MATERIAL
DRAWING No.
TRSA-0292-3
REMARKS
8
PAGE
/
13