RP15-2415DAW Recom Power Inc, RP15-2415DAW Datasheet - Page 3

• Manufacturer Part Number: RP15-2415DAW
• Description: CONV DC/DC 15W DL +/-15VOUT
• Manufacturer: Recom Power Inc
• Series: Powerline RP15-AWr
• Type: Isolatedr

Specifications of RP15-2415DAW

• Output: ±15V
• Number Of Outputs: 2
• Power (watts): 15W
• Mounting Type: Through Hole
• Voltage - Input: 9 ~ 36V
• Package / Case: 4-DIP Module
• 1st Output: 15 VDC @ 500mA
• 2nd Output: -15 VDC @ 500mA
• Size / Dimension: 1.00" L x 1.00" W x 0.39" H (25.4mm x 25.4mm x 9.9mm)
• Power (watts) - Rated: 15W
• Operating Temperature: -40°C ~ 85°C
• Efficiency: 88%
• Approvals: UL
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• 3rd Output: -
• 4th Output: -
• Other names: 30001100; 945-1262

www.recom-international.com
POWERLINE
DC/DC-Converter
Specifications
Notes :
Operating Frequency
Operating Temperature Range
Maximum Case Temperature
Storage Temperature Range
Thermal Impedance
(see Note 6)
Thermal Shock
Vibration
Relative Humidity
Case Material
Base Material
Potting Material
Conducted Emissions (see Note 7)
Radiated Emissions
ESD
Radiated Immunity
Fast Transient
Surge (see note 8)
Conducted Immunity
Weight
Packing Quantity
Dimensions
MTBF (see Note 9)
1. Values at nominal input voltage and no load/full load.
2. Typical Value at nominal input voltage and full load.
3. Test by minimum Vin and constant resistor load.
4. Simulated source impedance of 12µH. 12µH inductor in series with +Vin.
5. The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to negative input.
6. Optional Heat-sink P/N is 7G-0047-C. Powerline DC/DC Converters can be ordered with pre-mounted heatsinks including antivibration fixing clips
7. Meets Class A with external input capacitors shown below. Will meet Class B with external common mode filter (see Application Notes)
8. Requires external capacitor to meet EN61000-4-5: 220µF/100V, low ESR (48mOhm)
9. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C.
Positive logic ON/OFF is marked with suffix-P (eg. RP15-2405SAW/P)
Negative logic ON/OFF is marked with suffix-N (eg. RP15-2405SAW/N).
If no suffix is specified, the control pin will be omitted.
(add suffix -HC). See Application Notes for heatsink details.
MIL-HDBK 217F Notice 2. Ta = 25°C, full load, (Ground Benign, controlled environment).
External Output Trimming (optional)
With /CTRL suffix, output can be externally trimmed by
using the method shown here.
See Application Notes for details.
(typical at nominal input and 25°C unless otherwise noted)
REV:1/2010
Natural convection
Natural convection with Heat Sink
EN55022
EN55022
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
Refer to App Notes for tube dimensions
Bellcore TR-NWT-000332
MIL-HDBK 217F
RP15-S_DAW
Series
10-55Hz, 10G, 30 Min. along X, Y and Z
-40°C to +85°C(with derating)
25.4 x 25.4 x 9.9mm
Nickel plated copper
-55°C to +125°C
1330 x 10
Epoxy (UL94-V0)
563 x 10
MIL-STD-810F
5% to 95% RH
8 pcs per Tube
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
18.2°C/Watt
15.8°C/Watt
400kHz typ
FR4 PCB
+105°C
P-47
Class A
Class A
3
3
hours
hours
15g