NMJ0515SAC Murata Power Solutions Inc, NMJ0515SAC Datasheet - Page 5

• Manufacturer Part Number: NMJ0515SAC
• Description: CONV DC/DC 1W 5VIN 15V SIP 5.2KV
• Manufacturer: Murata Power Solutions Inc
• Series: NMJr
• Type: Isolatedr

Specifications of NMJ0515SAC

• Output: 15V
• Number Of Outputs: 1
• Power (watts): 1W
• Mounting Type: Through Hole
• Voltage - Input: 4.5 ~ 5.5V
• Package / Case: 7-SIP Module (4 Leads)
• 1st Output: 15 VDC @ 66mA
• Size / Dimension: 0.77" L x 0.39" W x 0.49" H (19.6mm x 9.9mm x 12.4mm)
• Power (watts) - Rated: 1W
• Operating Temperature: -40°C ~ 60°C
• Efficiency: 71%
• Approvals: cUL, UL
• Dc / Dc Converter O/p Type: Fixed
• No. Of Outputs: 1
• Input Voltage: 4.5V To 5.5V
• Power Rating: 1W
• Output Voltage: 15VDC
• Output Current: 66mA
• Approval Bodies: CURus
• Supply Voltage: 5V
• Dc / Dc Converter Case Style: SIP
• Product: Isolated
• Output Power: 0.99 W
• Input Voltage Range: 4.5 V to 5.5 V
• Input Voltage (nominal): 5 V
• Output Voltage (channel 1): 15 V
• Output Current (channel 1): 66 mA
• Isolation Voltage: 5.2 KV
• Output Type: Non-Isolated
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• 3rd Output: -
• 2nd Output: -
• 4th Output: -
• Lead Free Status / Rohs Status: Details
• Other names: 811-1536-5

www.murata-ps.com
CHARACTERISATION TEST METHODS
Ripple & Noise Characterisation Method
Ripple and noise measurements are performed with the following test confi guration.
C1
C2
C3
R1
R2
T1
RLOAD
Measured values are multiplied by 10 to obtain the specifi ed values.
Differential Mode Noise Test Schematic
1μF X7R m ultilayer ceramic capacitor, voltage rating to be a minimum of 3 times the output voltage of the DC/DC converter
10μF tantalum capacitor, voltage rating to be a minimum of 1.5 times the output voltage of the DC/DC converter with an ESR of less
than 100mΩ at 100 kHz
100nF multilayer ceramic capacitor, general purpose
450Ω resistor, carbon fi lm, ±1% tolerance
50Ω BNC termination
3T of the coax cable through a ferrite toroid
Resistive load to the maximum power rating of the DC/DC converter. Connections should be made via twisted wires
SUPPLY
DC/DC Converter
Input
+
-
Output
+
-
C1 C2 C3
R LOAD
R1
Technical enquiries email: [e-mail], tel: [phone]
T1
5.2kVDC Isolated 1W DC/DC Converters
R2
OSCILLOSCOPE
Y INPUT
2010-07-21 KDC_NMJ.G03 Page 5 of 6
NMJ Series