RP20-483.3SF-HC Recom Power Inc, RP20-483.3SF-HC Datasheet - Page 4
![CONV DC/DC 20W 36-75VIN 3.3VOUT](/photos/28/32/283237/rp20-f_series__with_heatsink_clip_sml.jpg)
RP20-483.3SF-HC
Manufacturer Part Number
RP20-483.3SF-HC
Description
CONV DC/DC 20W 36-75VIN 3.3VOUT
Manufacturer
Recom Power Inc
Series
Powerline RP20-Fr
Type
Isolated with Remote On/Offr
Datasheet
1.RP20-1205SF.pdf
(4 pages)
Specifications of RP20-483.3SF-HC
Output
3.3V
Number Of Outputs
1
Power (watts)
20W
Mounting Type
Through Hole
Voltage - Input
36 ~ 75V
Package / Case
6-DIP Module
1st Output
3.3 VDC @ 5A
Size / Dimension
2.00" L x 1.00" W x 0.40" H (50.8mm x 25.4mm x 10.2mm)
Power (watts) - Rated
16.5W
Operating Temperature
-40°C ~ 85°C
Efficiency
87%
Approvals
cUL, UL
Output Power
20 W
Input Voltage Range
36 V to 75 V
Input Voltage (nominal)
36 V to 75 V
Isolation Voltage
1.6 KV
Package / Case Size
2 in x 1 in
Output Voltage
3.3 V
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
3rd Output
-
2nd Output
-
4th Output
-
Lead Free Status / Rohs Status
Details
Other names
30001832
www.recom-international.com
POWERLINE
DC/DC-Converter
Notes :
Package Style and Pinning (mm)
1. The RP20-S_DF series requires a minimum of 10% loading on the output to maintain specified regulation. Operation under
2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment).
3. Simulated source impedance of 12µH. 12µH inductor in series with +Vin.
4. Maximum value at nominal input voltage and full load of standard type.
5. Typical value at nominal input voltage and full load.
6. Test by minimum Vin and constant resistor load.
7. The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to negative input.
8. Heat sink is optional and P/N: 7G-0020-C. Powerline DC/DC Converters can be ordered with pre-mounted heatsinks including antivibration fixing clips
9. An external filter capacitor is required for normal operation. The capacitor should be capable of handling 1A ripple current for 48V/24V models.
10.See application notes for Class B common mode filter suggestion.
no-load condition will not damage these devices, however they may not meet all listed specification.
(add suffix -HC). See Application Notes for heatsink details.
RECOM suggest: Nippon chemi-con KY series, 220µF/100V, ESR 90m Ω.
Positive logic ON/OFF is standard, no suffix (Ex. RP20-2405SF)
Negative logic ON/OFF is marked with suffix-N (Ex. RP20-2405SF/N).
Output can be externally trimmed by using the method
shown below. See Application Notes for details.
External Output Trimming
REV:2/2010
Pin Pitch Tolerance ±0.35 mm
Pin Connections
Pin #
1
2
3
4
5
6
Single
+Vout
-Vout
CTRL
+Vin
Trim
-Vin
RP20-S_DF
Series
+Vout
-Vout
CTRL
Dual
+Vin
Com
-Vin
P-67