YNV12T10-0G POWER ONE, YNV12T10-0G Datasheet - Page 10

• Manufacturer Part Number: YNV12T10-0G
• Description: CONVERTER DC-DC 12V 10A SIP
• Manufacturer: POWER ONE
• Series: Yr
• Type: Point of Load (POL) Non-Isolatedr

Specifications of YNV12T10-0G

• Output: 0.75 ~ 5.5V
• Number Of Outputs: 1
• Power (watts): 55W
• Mounting Type: Through Hole
• Voltage - Input: 9.6 ~ 14V
• Package / Case: 10-SIP Module
• 1st Output: 0.75 ~ 5.5 VDC @ 10A
• Size / Dimension: 2.00" L x 0.28" W x 0.54" H (50.8mm x 7.1mm x 13.7mm)
• Power (watts) - Rated: 55W
• Operating Temperature: -40°C ~ 85°C
• Efficiency: 94%
• Approvals: cUL, EN, UL
• Package: 10SIP
• Output Current: 10 A
• Output Voltage: 0.7525 to 5.5 V
• Input Voltage: 12 V
• Output Power: 50 W
• Switching Regulator: Yes
• Input Voltage Range: 9.6 V to 14 V
• Input Voltage (nominal): 12 V
• Output Voltage (channel 1): 0.7525 V to 5.5 V
• Output Current (channel 1): 10 A
• Package / Case Size: SIP
• Output Type: Regulated
• Product: Non-Isolated / POL
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• 3rd Output: -
• 2nd Output: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 179-2377

MCD10202 Rev. 1.0, 24-Jun-10
Fig. 5.0V.5: Turn-on transient for Vout = 5.0V with
application of Vin at full rated load current
(resistive) and 100μF external capacitance at Vin =
12V. Top trace: Vin (10V/div.); Bottom trace: output
voltage (1V/div.); Time scale: 2ms/div.
Fig. 5.0V.7: Output voltage response for Vout = 5.0V
to positive load current step change from 5A to 10A
with slew rate of 5A/μs at Vin = 12V. Top trace: output
voltage (100mV/div.); Bottom trace: load current
(5A/div.). Co = 100μF ceramic. Time scale: 20μs/div.
9.6-14 VDC Input; 0.7525-5.5 VDC Programmable @ 10A
YNV12T10 DC-DC Converter Data Sheet
Page 10 of 25
Fig. 5.0V.6: Output voltage ripple (20mV/div.) at full
rated load current into a resistive load with external
capacitance 100μF ceramic and Vin = 12V for Vout =
5.0V . Time scale: 2μs/div.
Fig. 5.0V.8: Output voltage response for Vout = 5.0V
to negative load current step change from 10A to 5A
with slew rate of -5A/μs at Vin = 12V. Top trace:
output voltage (100mV/div.); Bottom trace: load
current (5A/div.). Co = 100μF ceramic. Time scale:
20μs/div.
www.power-one.com