ZUP20-40/U TDK Corporation, ZUP20-40/U Datasheet - Page 30

• Manufacturer Part Number: ZUP20-40/U
• Description: PWR SUP BENCH PROG 0-20V 800W
• Manufacturer: TDK Corporation
• Series: ZUPr
• Type: Programmabler

Specifications of ZUP20-40/U

• Voltage - Output: 0 ~ 20V
• Number Of Outputs: 1
• Power (watts): 800W
• Applications: Commercial
• Power Supply Type: Switching (Closed Frame)
• Voltage - Input: 85 ~ 265VAC
• Mounting Type: Chassis Mount
• 1st Output: 0 ~ 20 VDC @ 40A
• Size / Dimension: 13.78" L x 5.51" W x 4.88" H (350mm x 140mm x 124mm)
• Power (watts) - Rated: 800W
• Operating Temperature: 0°C ~ 50°C
• Efficiency: 82%
• Approvals: CE, EN, UL
• Line Regulation: 0.01%
• Load Regulation: 0.07%
• Accuracy: 0.02% + 12 mV
• Brand/series: ZUP
• Current, Output: 40 A
• Display Type: Digital Meter
• Power, Output: 800 W
• Power, Rating: 800 W (Max.)
• Regulation, Line: 0.01% + 5 mA⁄1 mV + 0.005%
• Regulation, Load: 0.07% + 7 mA⁄2 mV + 0.005%
• Standards: UL Listed, CE Marked
• Temperature Coefficient: 30 ppm⁄°C (CV)⁄100 ppm⁄°C (CC)
• Temperature, Operating, Maximum: 50 °C
• Temperature, Operating, Minimum: 0 °C
• Voltage, Input: 85-265 VAC
• Voltage, Noise: 80 mV @ 20 MHz BW
• Voltage, Output: 20 VDC
• Voltage, Ripple: 5 mV @ 5 Hz to 1 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• 3rd Output: -
• 2nd Output: -
• 4th Output: -
• Lead Free Status / Rohs Status: RoHS Compliant part
• Other names: 285-1675; ZUP2040/U

4
2
3
4.2.2
Table 4-1 contd.: Front panel controls and indicators
10
11
12
13
#
Control/Indicator
AC ON/OFF
V/A Pushbutton
ADDR
OVP / UVP
6V to 60V models
Rear Panel
5
Fig. 4-2: Rear panel connections
Description
Turns AC power On and Off.
Selects the voltage or current adjust mode. fast or slow
adjustment speed can be selected by pressing the
pushbutton consecutively. Adjustment is made by rotating
the Adjust knob.
Makes selection between Over-voltage or Under-voltage
adjust mode. Adjustment is made by rotating the Adjust
knob.
Main function: Selects the address for remote control. The
adjustment is made by rotating the Adjust knob.
Auxiliary function: Holding ADDR pressed for approx. 3sec.
changes the function to Baud-rate selection.
6
1
80V and 120V models
4.4.5
4.4.6
4.4.2
4.4.3
5.2.1
5.2.3
Par.
6