SCS603 TDK Corporation, SCS603 Datasheet - Page 2
![no-image](/images/manufacturer_photos/0/6/653/tdk_corporation_sml.jpg)
SCS603
Manufacturer Part Number
SCS603
Description
PWR SUP AC-DC 3.3V 12.0A
Manufacturer
TDK Corporation
Series
SC60r
Datasheet
1.SCS4024.pdf
(3 pages)
Specifications of SCS603
Voltage - Output
3.3V
Number Of Outputs
1
Power (watts)
60W
Applications
Commercial
Power Supply Type
Switching (Open Frame)
Voltage - Input
85 ~ 265VAC
Mounting Type
Chassis Mount
1st Output
3.3 VDC @ 12A
Size / Dimension
5" L x 3" W x 1.34" H (127mm x 76.2mm x 34mm)
Power (watts) - Rated
60W
Operating Temperature
0°C ~ 70°C
Efficiency
70%
Approvals
CE, CSA, EN, IEC, UL
Line Regulation
±2%
Load Regulation
±2%
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
3rd Output
-
2nd Output
-
4th Output
-
Other names
285-1590
4. Safety Approvals
5. Environmental Parameters
6. C.E. Marking
Designed to comply with EN60950-A4, CSA C22.2 No.234-M90, CSA-C22.2 No.950-95 and UL1950-95 when correctly installed in a
limited access environment.
The SC Series of products is designed for the following parameters: Material group llla, Pollution Degree 2, Installation Category 2,
class 1, indoor use (as part of any other equipment such that the SC Series product is accessible to service engineers only).
Humidity: 5 to 95% RH non-condensing, Operational Temperature 0 to 50
STORAGE/TEMPERATURE: Temperature –40
Approval Limitations - Use in North America
When this product is used on 180-250VAC mains with no neutral, connect the two live wires to L (live) and N (neutral) terminals on the
input connector. In this instance double pole fusing is required.
Level of Insulation
Dielectric Strength testing is carried out as follows: Primary AC circuit to earth – 2.4kVDC; **Primary mains circuits to secondary
>4.3kVDC. (**This test is not possible as a finished product as damage to “Y” capacitors will occur.)
CE marking when applied to a product covered by this handbook indicates compliance with the Low Voltage Directive (73/23/EEC) as
modified by the CE Marking Directive (93/68/EEC) in that it complies with EN60950.
0
C to +85
SCS4x and SCS6x
0
C. Humidity: 5% to 95% RH non-condensing.
0
C.