SCD401212 TDK Corporation, SCD401212 Datasheet - Page 2

• Manufacturer Part Number: SCD401212
• Description: PWR SUP AC-DC DUEL 12.0V/-12.0V
• Manufacturer: TDK Corporation
• Series: SC40r

Specifications of SCD401212

• Voltage - Output: ±12V
• Number Of Outputs: 2
• Power (watts): 40W
• Applications: Commercial
• Power Supply Type: Switching (Open Frame)
• Voltage - Input: 85 ~ 265VAC
• Mounting Type: Chassis Mount
• 1st Output: 12 VDC @ 1.8A
• 2nd Output: -12 VDC @ 1.5A
• Size / Dimension: 5" L x 3" W x 1" H (127mm x 76.2mm x 25.4mm)
• Power (watts) - Rated: 40W
• Operating Temperature: 0°C ~ 70°C
• Efficiency: 70%
• Approvals: CE, CSA, EN, IEC, UL
• Line Regulation: ±2%, ±5%
• Load Regulation: ±2%, ±5%
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• 3rd Output: -
• 4th Output: -
• Other names: 285-1572

4. Safety Approvals
5. Environmental Parameters
6. C.E. Marking
Designed to comply with EN60950-A4, CSA C22.2 No.234-M90, CSA-C22.2 No.950-95 and UL1950-95 when correctly installed in a
limited access environment.
The SC Series of products is designed for the following parameters: Material group llla, Pollution Degree 2, Installation Category 2,
class 1, indoor use (as part of any other equipment such that the SC Series product is accessible to service engineers only).
Humidity: 5 to 95% RH non-condensing, Operational Temperature 0 to 50
STORAGE/TEMPERATURE: Temperature –40
Approval Limitations - Use in North America
When this product is used on 180-250VAC mains with no neutral, connect the two live wires to L (live) and N (neutral) terminals on the
input connector. In this instance double pole fusing is required.
Level of Insulation
Dielectric Strength testing is carried out as follows: Primary AC circuit to earth – 2.4kVDC; **Primary mains circuits to secondary
>4.3kVDC. (**This test is not possible as a finished product as damage to “Y” capacitors will occur.)
CE marking when applied to a product covered by this handbook indicates compliance with the Low Voltage Directive (73/23/EEC) as
modified by the CE Marking Directive (93/68/EEC) in that it complies with EN60950.
0
C to +85
SCS4x and SCS6x
0
C. Humidity: 5% to 95% RH non-condensing.
0
C.