CDU-L-3-35-DMX Dialight, CDU-L-3-35-DMX Datasheet - Page 10

• Manufacturer Part Number: CDU-L-3-35-DMX
• Description: COLORDRIVER36 3CH RGB LED DRIVER
• Manufacturer: Dialight
• Series: CDUr

Specifications of CDU-L-3-35-DMX

• Voltage - Input: 110 ~ 240VAC
• Voltage - Output: 4.8 ~ 48V
• Current - Output: 350mA
• Power (watts): 6 ~ 54W
• Mounting Type: Panel Mount
• Termination Style: Wire Leads
• Size / Dimension: 12.20" L x 2.17" W x 1.77" H (310mm x 55mm x 45mm)
• Operating Temperature: -10°C ~ 40°C
• For Use With: 350-1956 - LIGHT ENGINE RGB MODULAR LINKLED350-1953 - LED LIGHT ENGINE RGB350-1952 - LED EDGE LIGHT ENGINE RGB350-1929 - COLOR ENGINE 6X1W RGB CIRCULAR350-1928 - COLOR ENGINE 3X1W RGB CIRCULAR350-1927 - COLOR ENGINE 36X1W RGB CIRCULAR350-1926 - COLOR ENGINE 18X1W RGB LINEAR350-1925 - COLOR ENGINE 18X1W RGB CIRCULAR350-1924 - COLOR ENGINE 12X1W RGB LINEAR350-1923 - COLOR ENGINE 12X1W RGB CIRCULAR
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 350-1922; CDUL335DMX

Colordriver™ RFCC
Connection Conditions
1W LEDs per Master Unit
1W LEDs per Slave Unit
No. of Slaves per Master Unit
Max. Cable Length to LEDs
Max. Cable Length between Drive Units
Total Circuit Cable Length
Colordriver RF Remote Control Specification
Battery Voltage/Type
Battery Life
RF Frequency
Modulation
Dimensions
Operating Modes
Color Cycle
Fixed Color
On/Off
Two selectable memories
>30,000 keypresses
AAA alkaline cell
433.92MHz
FM
L96.0mm x W47.0mm x
H24.0mm
18
100
18
10m
1km
30m
9
The Colordriver ™ RFCC is a three-channel
RGB LED driver, which combines an
intelligent power driver with an intuitive RF
remote control. Both masters & slaves can
drive up to 18 total 1W LEDs (3 channels
X6). Up to 99 slaves can be added per
master thus allowing control of up to 1800
LEDs with a single remote.
All Dialight Lumidrives Colordrivers come
with the “Lifesaver ™ ” system which (when
used with “Lifesaver” equipped Dialight-
Lumidrives Colorengines) monitors PCB
temperature and automatically throttles back
the drive current should the system
overheat to ensure long LED lifetime.
Wall Mounted Control Unit
The control unit plugs directly into a slave
module giving the same functions as a
wireless remote. Additionally it can accept
an input from a DMX control system. In this
mode the front plate is disabled.
Order codes:
RFCC Master:
RFCC Slave:
RFCC Remote:
SL Control:
Dimensions:
Weight:
CDURF-3-35
CDUSL-3-35
CDURF-TX
CDUSL-CU
L179mm x W53mm x
H32mm
163g