ZUSBSC00100ZACG Zilog, ZUSBSC00100ZACG Datasheet - Page 3

• Manufacturer Part Number: ZUSBSC00100ZACG
• Description: KIT ACCESSORY USB SMART CABLE
• Manufacturer: Zilog

Specifications of ZUSBSC00100ZACG

• Accessory Type: USB Smart Cable
• Interface Type: USB
• Operating Supply Voltage: 5 V
• Product: Interface Modules
• For Use With/related Products: Z8 Encore!®, Z8 Encore! XP®, eZ80Acclaim!®, ZNEO™ Dev Boards
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 269-4539

2. In the Wizard, select Install from a list or specific location (Advanced); then click
3. Select Search for the best driver in these locations and Include this location in
4. Browse to the driver directory, one of the following:
5. Click Next, and then click Next again after the appropriate driver is found.
6. Click Finish to complete the installation.
Windows 2000
1. Connect the USB Smart Cable to the host PC for the first time.
2. In the Wizard, click Next.
3. Select Search for a suitable driver for my device (Recommended); then click Next
4. Select Specify a location; then click Next.
5. Browse to the driver directory, one of the following:
6. Click OK, and then click Next after the appropriate driver is found.
7. Click Finish to complete the installation.
Windows 98SE
1. Connect the USB Smart Cable to the host PC for the first time.
2. In the Wizard, click Next.
3. Select Search for the best driver for your device (Recommended); then click Next
4. Select Specify a location; then browse to the driver directory, one of the following:
5. Click Next, and then click Next again after the appropriate driver is found.
UM019502-0606
Note:
Next.
search.
<ZDSII Installation Directory>\device drivers\USB
<ZDSII Installation CD>\Device Drivers\USB
The Found New Hardware Wizard should activate automatically.
<ZDSII Installation Directory>\device drivers\USB
<ZDSII Installation CD>\Device Drivers\USB
The Found New Hardware Wizard should activate automatically.
<ZDSII Installation Directory>\device drivers\USB
<ZDSII Installation CD>\Device Drivers\USB
If the Windows Logo testing dialog appears, select Continue Anyway.
Installing the USB Smart Cable and Driver
Opto-Isolated USB Smart Cable
User Manual
Page 3