101-0581 Rabbit Semiconductor, 101-0581 Datasheet - Page 69

• Manufacturer Part Number: 101-0581
• Description: KIT CONNECTION FOR BL2500 SERIES
• Manufacturer: Rabbit Semiconductor

Specifications of 101-0581

• Accessory Type: RabbitNet Connectivity Kit
• For Use With/related Products: BL2500
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 101-581; 101-581

5.2.3 Run the PINGME.C Demo
Connect the crossover cable from your computer’s Ethernet port to the Coyote’s RJ-45
Ethernet connector. Open this sample program from the
compile the program, and start it running under Dynamic C. When the program starts run-
ning, the green LNK light on the Coyote should be on to indicate an Ethernet connection is
made. (Note: If the LNK light does not light, you may not have a crossover cable, or if you
are using a hub perhaps the power is off on the hub.)
The next step is to ping the board from your PC. This can be done by bringing up the MS-
DOS window and running the ping program:
or by Start > Run
and typing the command
Notice that the orange ACT light flashes on the Coyote while the ping is taking place, and
indicates the transfer of data. The ping routine will ping the board four times and write a
summary message on the screen describing the operation.
User’s Manual
ping 10.10.6.100
ping 10.10.6.100
SAMPLES\TCPIP\ICMP
folder,
63